Page 34 of 35
Re: PCM Hammer Release 021
Posted: Mon Oct 09, 2023 9:13 am
by In-Tech
Hiya,
Don't feel bad. There are plenty of times I attempt to read stuff and have to ignore the OS ID and just go with what I think might work. Not PCM Hammer related, just wanted to throw that out there.
Re: PCM Hammer Release 021
Posted: Mon Oct 09, 2023 10:04 am
by Gampy
That's just it, I shouldn't be missing stupid simple things like that ... I want to blame it on the Morphine and roll it in like most folks would do, but then what do I do, set here stewing on the reality of what's coming!, But that's not it, I just flat missed it.
Pisses me of royally!
I am off the Steroids ATM and hecka tired, I cannot keep my eyes open, so gonna go take a nap with my feet up the wall and see if I can get this club foot down a bit (swelling).
-Enjoy
Re: PCM Hammer Release 021
Posted: Mon Oct 09, 2023 10:27 am
by mechfab
debug log from the app store version
Re: PCM Hammer Release 021
Posted: Mon Oct 09, 2023 10:31 am
by mechfab
antus wrote:[03:08:25:332] OSID: 1273002
The OSID is not recognised. Probably in a future version of pcmhammer we'll get the size from the flash chip definition instead of the osid definition (which doesnt exist, hence 0 bytes). But at this stage, that's not how it works.
ok than that make it evan more strange as the version i download an unzip are the only ones that wont read the pcm.
yet the version from Microsoft app store reads it fine no problems.
Re: PCM Hammer Release 021
Posted: Mon Oct 09, 2023 11:09 am
by antus
I think the microsoft app store version is a *lot* older, it probably presumes its an ls1 pcm correctly, but does not work for the other pcms that newer pcmhammer works with (and why the osid logic changed since then).
Re: PCM Hammer Release 021
Posted: Mon Oct 09, 2023 11:51 am
by mechfab
arhh right that makes sense, ill have a look at what it supports and load that onto the bench unit to try again with,
Cheeers
Re: PCM Hammer Release 021
Posted: Mon Oct 09, 2023 12:53 pm
by mechfab
i can indeed confirm after loading a Osid that pcm hammer works with it reads the file correctly
my bad been a while since ive used software like this ive mainly been using hp tuners last few years
Thanks for the help
Re: PCM Hammer Release 021
Posted: Sun Jan 07, 2024 7:38 pm
by emilebos2
So I’m a newb to tuning and for starters. Have started my skill up with PCM Hammer 021 and would like to change my fan 1 & 2 on/off temps after fitting a new thermostat to my 02 WH Holden Caprice LS1.
Recently ordered and received my OBDX Pro GT to get me into the PCM via PCM Hammer & Universal Patcher. The OBDX Pro GT is connecting, but when I try to do a PCM read I get the error: “VIN query failed: Timeout” Has anyone else experienced this issue?
My initial thought is the factory tune might be locked? Are factory bin files locked??
Re: PCM Hammer Release 021
Posted: Sun Jan 07, 2024 9:37 pm
by Tazzi
emilebos2 wrote: ↑Sun Jan 07, 2024 7:38 pm
So I’m a newb to tuning and for starters. Have started my skill up with PCM Hammer 021 and would like to change my fan 1 & 2 on/off temps after fitting a new thermostat to my 02 WH Holden Caprice LS1.
Recently ordered and received my OBDX Pro GT to get me into the PCM via PCM Hammer & Universal Patcher. The OBDX Pro GT is connecting, but when I try to do a PCM read I get the error: “VIN query failed: Timeout” Has anyone else experienced this issue?
My initial thought is the factory tune might be locked? Are factory bin files locked??
Select the OBDX Pro device as a serial device, do not select it as a J2534 device.
Re: PCM Hammer Release 021
Posted: Mon Jan 08, 2024 8:16 am
by emilebos2
Thanks Tazzi. will give that a go tonight and provide an update
