pcmhacking.net

Holden VF Cruze Colorado Software V0.11
Added support for fast devices eg Tactrix and Autel jbox
Added support for slow devices eg VXDIAG
BCM Reset
- Read BCM Cal info, Vin, odometer, Keys, and Code (Can't read Keys and Code on VF and Colorado)
*- Write Vin (VF, Colorado and Cruze)
*- Reset BCM (Untested on VF and Colorodo)
*- Write odometer (VF, Colorado and Cruze)
*- Read/Write eeprom
IPC Reset
- Read IPC Cal info, Vin, odometer and Link info
*- Write Vin
*- Reset IPC
*- Link IPC
Radio Reset (Mylink)
- Read Vin
*- Reset Radio(Remove security message)
*Ecu Reset (Simtec 76, E78, E39A and E98)
- Eeprom clone for E39A, E67, E98, SIM76.1 and E78
- Read Vin, Link info and Cal info
- Write Vin
- Read Code
- Reset and Brute Reset
*Cruze Steering Column Lock
- Read and Write VIN
- Reset, Link and Read Link Information
*EBCM
- Read code (cruze only)
- Reset
- Read/Write vin
- Link info
*PBCM
- Read/Write vin
- Calibrate
- Read cal info
Bcm Eeprom Bin File Editor
- Read BCM part number, seed, key, code, Vin, odometer and Keys
- Save Code, Vin, Odometer and Keys
- open a folder to read all bin files
* Not available in demo version
V0.04
- Added Cruze read code support for Simtec 76.1 and E78
V0.05
Added Cruze Steering column lock control module
- Link, Reset, Link info, VIN read and write
V0.06
Added Support for E39A and E98
V0.07
Added Eeprom clone for E39A, E67, E98, SIM76.1 and E78
V0.08
Added support for fast devices eg Tactrix and Autel jbox
Added support for slow devices eg VXDIAG
V0.11
Added BCM Eeprom clone
Added EBCM read/reset code and vin programming
Added PBCM read/write vin and calibrate

Very detailed, nice

Will this work on a North American Cruze or will I have to try and see?

FriskyDingo wrote:Will this work on a North American Cruze or will I have to try and see?

Try the demo out and see

It works! 2014 Cruze LS 1.8l/Manual . I'm using VCX Nano GM, I even had MDI selected once and it still worked. Strangely it wont work if i select mdi2

It didn't find the code location
And key data is wrong

mattyjf01 wrote:It didn't find the code location
And key data is wrong

Anything I can do to help?

Try the new demo and press save ram button
Thanks

Looks promising

9944 @0x06AE

Before it displayed the possible codes did it display

null
null
null
?
might need more of a delay vxdiag is slow lol