Re: Holden VF / Colorado / Cruze BCM, IPC and Mylink Reset
Posted: Sun Jul 31, 2022 8:25 pm
Cruze VF Reset demo V0.03
Added VF and colorado to bin file editor.
Added VF and colorado to bin file editor.
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
Holden VF Cruze Colorado Software
Page 3 of 4
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Posted: Wed Aug 03, 2022 3:10 am
Is it possible to save the bin from the bcm?
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Posted: Wed Aug 03, 2022 9:10 am
Yes but without a kernel you are limited to 0x10 bytes at a time
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Posted: Wed Aug 03, 2022 11:11 am
That hurts.mattyjf01 wrote:Yes but without a kernel you are limited to 0x10 bytes at a time
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Posted: Wed Aug 03, 2022 11:42 pm
From what I've seen on other modules, certain memory regions are locked out of read requests even if you've got security access.
There's a paid tool that can dump them relatively cheaply, but I'm not sending money to that particular country right now.
What does the reset function accomplish? I've got an acquaintance who might be needing a BCM swap soon.
There's a paid tool that can dump them relatively cheaply, but I'm not sending money to that particular country right now.
What does the reset function accomplish? I've got an acquaintance who might be needing a BCM swap soon.
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Posted: Thu Aug 04, 2022 8:20 am
I use to eeprom copy the bcm. Till I corrupted 2 eeproms (which turned out to be a faulty clip).
I had to pay for 2 vins both times(1 just to reset the sh bcm).
I've had ioterminal for awhile (just gm ecu)
So I purchased gm bcm and Siemens to do the simtec 76
It's a good tool
I had to pay for 2 vins both times(1 just to reset the sh bcm).
I've had ioterminal for awhile (just gm ecu)
So I purchased gm bcm and Siemens to do the simtec 76
It's a good tool
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Posted: Sun Sep 25, 2022 12:02 pm
V0.04
- Added Cruze read code support for Simtec 76.1 and E78
- Added Cruze read code support for Simtec 76.1 and E78
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Posted: Fri Sep 30, 2022 11:39 am
V0.05
Added Cruze Steering column lock control module
- Link, Reset, Link info, VIN read and write
Added Cruze Steering column lock control module
- Link, Reset, Link info, VIN read and write
Re: Holden VF Cruze Colorado Software
Posted: Sat Nov 12, 2022 5:40 pm
V0.06
Added Support for E39A and E98
Added Support for E39A and E98
Re: Holden VF Cruze Colorado Software
Posted: Sun Mar 26, 2023 9:18 am
V0.07
Added Eeprom clone for E39A, E67, E98, SIM76.1 and E78
Added Eeprom clone for E39A, E67, E98, SIM76.1 and E78