PCM Hammer P04 Support Project
Re: PCM Hammer P04 Support Project
Try it, whats there to lose ... You might get lucky and that P05 OsID will be in the P04 puke soup of OsID's!
It will still fail for the security algorithm will be wrong ... But at least we will know the OsID of that P05.
-Enjoy
It will still fail for the security algorithm will be wrong ... But at least we will know the OsID of that P05.
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: PCM Hammer P04 Support Project
Is this a V6 (LX9 3500?) or an I4 (Ecotec) car?zack4200 wrote:The two I have are 12583369 and 12594527.
FWIW, I also picked up a P05 from a 2005 Malibu Maxx while I was at the yard today. Is it worth even attempting to read with the current version of PCM Hammer?
I plan to go the the JY on Saturday and grab a few PCMs.
Mike
-
- Posts: 79
- Joined: Sat Jun 25, 2022 1:35 am
- cars: 1982 Chevy Chevette 3400 LA1 swapped
1986 Chevy Chevette
1998 Chevy s10
Re: PCM Hammer P04 Support Project
yeah it failed, I don't see this OSID in the PCMinfo though.Gampy wrote:Try it, whats there to lose ... You might get lucky and that P05 OsID will be in the P04 puke soup of OsID's!
It will still fail for the security algorithm will be wrong ... But at least we will know the OsID of that P05.
-Enjoy
Code: Select all
[10:50:43:599] PCM Hammer (4/27/2023, 9:39 PM)
[10:50:43:600] Thursday, April 27 2023 @10:50:43:60
[10:50:44:462] Device Found: OBDX Pro VT
[10:50:44:624] Voltage is: 14.58V
[10:50:44:628] Device Successfully Initialized and Ready
[10:50:57:618] Will save to D:\Car Stuff\PCM hammer logs\05 malibu maxx p05.bin
[10:51:07:659] Querying operating system of current PCM.
[10:51:07:693] OSID: 12608119
[10:51:07:775] The PCM didn't accept the unlock key value
[10:51:09:279] Unable to process unlock response.
[10:51:09:282] Unlock was not successful.
Meant to include that in my other comment, sorry. it's an LX9 v6MudDuck514 wrote:Is this a V6 (LX9 3500?) or an I4 (Ecotec) car?
I plan to go the the JY on Saturday and grab a few PCMs.
Mike
-
- Posts: 79
- Joined: Sat Jun 25, 2022 1:35 am
- cars: 1982 Chevy Chevette 3400 LA1 swapped
1986 Chevy Chevette
1998 Chevy s10
Re: PCM Hammer P04 Support Project
Added the OSID as a P04 just to test, then used a script in Universal Patcher to find the key and tried it again, but it failed to load the loader.
[11:11:28:004] PCM Hammer (4/27/2023, 10:59 PM)
[11:11:28:009] Thursday, April 27 2023 @11:11:28:00
[11:11:28:232] Thanks for using PCM Hammer.
[11:11:28:978] Device Found: OBDX Pro VT
[11:11:29:144] Voltage is: 14.57V
[11:11:29:152] Device Successfully Initialized and Ready
[11:12:37:721] Will save to D:\Car Stuff\PCM hammer logs\05 malibu maxx lx9 key3006.bin
[11:12:40:824] Querying operating system of current PCM.
[11:12:40:852] OSID: 12608119
[11:12:40:858] WARNING: P04 Support is still in development.
[11:12:42:111] User Defined Key: 0x3006
[11:12:42:134] Unlock succeeded.
[11:12:42:147] Attempting switch to VPW 4x
[11:12:42:172] Module 0x10 (engine controller) has agreed to enter high-speed mode.
[11:12:43:310] PCM uses a kernel loader.
[11:12:46:128] Failed to upload loader to PCM
[11:12:46:153] Clearing trouble codes.
[11:12:47:181] Elapsed time 00:00:05.0445988
[11:12:47:184] Read failed, Error
[11:11:28:004] PCM Hammer (4/27/2023, 10:59 PM)
[11:11:28:009] Thursday, April 27 2023 @11:11:28:00
[11:11:28:232] Thanks for using PCM Hammer.
[11:11:28:978] Device Found: OBDX Pro VT
[11:11:29:144] Voltage is: 14.57V
[11:11:29:152] Device Successfully Initialized and Ready
[11:12:37:721] Will save to D:\Car Stuff\PCM hammer logs\05 malibu maxx lx9 key3006.bin
[11:12:40:824] Querying operating system of current PCM.
[11:12:40:852] OSID: 12608119
[11:12:40:858] WARNING: P04 Support is still in development.
[11:12:42:111] User Defined Key: 0x3006
[11:12:42:134] Unlock succeeded.
[11:12:42:147] Attempting switch to VPW 4x
[11:12:42:172] Module 0x10 (engine controller) has agreed to enter high-speed mode.
[11:12:43:310] PCM uses a kernel loader.
[11:12:46:128] Failed to upload loader to PCM
[11:12:46:153] Clearing trouble codes.
[11:12:47:181] Elapsed time 00:00:05.0445988
[11:12:47:184] Read failed, Error
- Attachments
-
- PcmHammer_debugLog_20230427@231305 - P05 (OSID added, key 3006).txt
- (24.46 KiB) Downloaded 72 times
Re: PCM Hammer P04 Support Project
Wow, I'm astonished it wasn't already part of the P04 puke soup, I guess we need to add the rest of the possible combinations of 8 digits so we can cover all possible cases ...
-Enjoy
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 174
- Joined: Wed Apr 05, 2023 11:38 am
- cars: 2004 Grand am gt
Re: PCM Hammer P04 Support Project
would you mind sending the newest version of pchammer through pm or put it on a site like file.io , this site refuses to let me download it now.Gampy wrote:Wow, I'm astonished it wasn't already part of the P04 puke soup, I guess we need to add the rest of the possible combinations of 8 digits so we can cover all possible cases ...
-Enjoy
Re: PCM Hammer P04 Support Project
It's not this site, it's your POS Os ...
Microsoft knows better then you, what you want!
-Enjoy
Microsoft knows better then you, what you want!
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 34
- Joined: Wed May 08, 2013 4:32 pm
- cars: 2006 2500 HD. 6.0 4L80
1986 Suburban LB7 duramax swap in progress
1988 Suburban L21 454 swap in progress
2003 Grand Am, 3400, F23 swap, stock P04 PCM
1985 Pontiac Fiero SE LX9 F23 Swap, MS3 Pro - Location: Aiken SC
Re: PCM Hammer P04 Support Project
This was the OSID for my 2003 Grand Am.
12583339
That said, I have a bunch of bin files that were read using other hardware, I have no definitive way of knowing that they somehow haven't somehow been changed or verifying their accuracy, but I can compile a list of OSID's from them if you would like.
12583339
That said, I have a bunch of bin files that were read using other hardware, I have no definitive way of knowing that they somehow haven't somehow been changed or verifying their accuracy, but I can compile a list of OSID's from them if you would like.
Re: PCM Hammer P04 Support Project
Got it, Thank ya sir!
-Enjoy
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 95
- Joined: Wed Jan 16, 2019 1:34 am
- cars: 2007 Hemi powered JKUR
1987 YJ
1955 CJ5
1988 MJ Comanche - Location: Commerce GA.
Re: PCM Hammer P04 Support Project
Well, I got the Aurora PCM to read. Here are the logs the Bin and what Universal Patcher reads. Universal Patcher reads the DTCs, the VE table and the MAF.
All I had to do was get my OBDX Pro VT out and hook it up and all was good.
All I had to do was get my OBDX Pro VT out and hook it up and all was good.
Bad things happen FAST!!!