Delco OSE FlashTool V1.51

Programs / Tools / Scripts
Posts: 4
Joined: Wed Sep 19, 2018 5:24 pm

Re: Delco OSE FlashTool V1.51

Postby denchy » Wed Sep 19, 2018 5:33 pm

Having some issues trying to get bin from a 02 vx v6 manual

setup im using, also tried "wait for silence" upto 50
Image

clicking Connect to ECM works ok it comes back with
"Found VX Flash PCM, BCC: DMTY
VIN Of Connected Vehicle: 6H8VXK69A2L84xxxx"

clicking Get Cal/Bin or RAM results in an error

Starting Bin Dumper...
5:04:52 PM Using Uploaded Bin Dumper Routines
5:04:52 PM Requesting 64 Bytes From Address $0
5:04:53 PM No Response, Re-Sending The Request
5:04:53 PM Requesting 64 Bytes From Address $0
5:04:53 PM Got 64 Bytes Of Data
5:04:53 PM Requesting 64 Bytes From Address $40
5:04:53 PM Got 64 Bytes Of Data
5:04:53 PM Requesting 64 Bytes From Address $80
5:04:53 PM Got 64 Bytes Of Data
5:04:53 PM Requesting 64 Bytes From Address $C0
5:04:53 PM No Response, Re-Sending The Request
5:04:53 PM Requesting 64 Bytes From Address $C0
5:04:54 PM No Response, Re-Sending The Request
5:04:54 PM Requesting 64 Bytes From Address $C0
5:04:54 PM No Response, Re-Sending The Request
5:04:54 PM Requesting 64 Bytes From Address $C0
5:04:54 PM No Response, Re-Sending The Request
5:04:54 PM Requesting 64 Bytes From Address $C0
5:04:54 PM Got 64 Bytes Of Data
5:04:54 PM Requesting 64 Bytes From Address $100
5:04:55 PM Got 64 Bytes Of Data
5:04:55 PM Requesting 64 Bytes From Address $140
5:04:55 PM Got 64 Bytes Of Data
5:04:55 PM Requesting 64 Bytes From Address $180
5:04:55 PM No Response, Re-Sending The Request
5:04:55 PM Requesting 64 Bytes From Address $180
5:04:55 PM No Response, Re-Sending The Request
5:04:55 PM Requesting 64 Bytes From Address $180
5:04:56 PM No Response, Re-Sending The Request
5:04:56 PM Requesting 64 Bytes From Address $180
5:04:56 PM Got 64 Bytes Of Data
5:04:56 PM Requesting 64 Bytes From Address $1C0
5:04:56 PM No Response, Re-Sending The Request
5:04:56 PM Requesting 64 Bytes From Address $1C0
5:04:56 PM Got 64 Bytes Of Data
5:04:56 PM Requesting 64 Bytes From Address $200
5:04:56 PM No Response, Re-Sending The Request
5:04:56 PM Requesting 64 Bytes From Address $200
5:04:57 PM No Response, Re-Sending The Request
5:04:57 PM Too Many ReSends, Aborted Task
5:04:57 PM COM3 closed
5:04:57 PM Clean Up The PCM
5:04:57 PM No Response
5:04:58 PM Frame Error

any idea's whats going on with it?

User avatar
Posts: 4850
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Delco OSE FlashTool V1.51

Postby delcowizzid » Wed Sep 19, 2018 8:42 pm

Is it a pcmhacking.net cable or other some don't respond fast enough
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 4
Joined: Wed Sep 19, 2018 5:24 pm

Re: Delco OSE FlashTool V1.51

Postby denchy » Wed Sep 19, 2018 11:48 pm

got it from envyous customs

User avatar
Posts: 6315
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: Delco OSE FlashTool V1.51

Postby vlad01 » Thu Sep 20, 2018 3:22 pm

Edit.

is it the ELM cable?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.


User avatar
Posts: 2573
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Delco OSE FlashTool V1.51

Postby Jayme » Thu Sep 20, 2018 5:56 pm

sounds like interference.... since its getting some data but rejecting others. try turning off your stereo, AC blower, headlights and everything else you can find to turn off, leave the laptop power cable unplugged so its just on battery, then leave engine on reds not running and try again.

Posts: 4
Joined: Wed Sep 19, 2018 5:24 pm

Re: Delco OSE FlashTool V1.51

Postby denchy » Thu Sep 20, 2018 8:41 pm

So i pulled out a bunch of fuses and it started working fine, placing the fuses back in while it was running found the one that causes the problem.

7.5A fuse labeled
ECC HTR CONT.
INST. TRIP COMP

got a few copies of the bin now :)
Thanks for the help

User avatar
Posts: 232
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: Delco OSE FlashTool V1.51

Postby j_ds_au » Sun Sep 23, 2018 11:22 pm

vlad01 wrote:Edit.

is it the ELM cable?

Since it got part way through, including identifying the car, it can't be the wrong _type_ of cable.

Posts: 1
Joined: Wed Oct 10, 2018 10:22 am

Re: Delco OSE FlashTool V1.51

Postby Bumblebeetuner » Sat Jan 19, 2019 12:55 am

Ok guys, so I'm new to all of this. I've read and researched until I'm blue in the face. I've hit a stand still. Trying to connect to a flash based PCM. I select the find seed/key and a pop up asks me what hex key I want to start counting up from. I have no idea what this means nor can I find any information about this particular pop up box online.

Site Admin
User avatar
Posts: 5679
Joined: Sat Feb 28, 2009 8:34 pm

Re: Delco OSE FlashTool V1.51

Postby antus » Sat Jan 19, 2019 12:40 pm

tuners can change the security key to try and lock other people out. normally you just read or write, but if it fails to unlock you can use that try all the keys and recover it to re-gain access to your computer. normally you would not need to use find seed/key at all.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

PreviousNext

Return to Tools

Who is online

Users browsing this forum: No registered users and 0 guests