Delco OSE FlashTool V1.51
Posted: Tue Apr 14, 2009 11:56 pm
Sick of having to always remove the memcal or EPROM just to make a calibration change? Well this small tool will mean the end of that. Just read the calibration data, use your favourite bin editor to make changes and write it back in. Simple! All this is done over ALDL so no extra cables or boxes lying on the passenger floor and no EPROM burner and UV light everytime you want to change a bit.
Memcal Based ECU/PCM: The requirements are that the ECM or PCM is fitted with a NVRAM in place of the memcal loaded with a write capabale bin (ie OSE code) and you have an interface for data - either over the vehicles 8192baud ALDL port or an add-on board for the early 160baud ECMs to allow 8192 ALDL
Flash Memory Based ECU/PCM: Before you try anything read the very important information on using the flashtool with a flash based PCM here
For a brief rundown of ALDL and also the device ID of different models of ECM/PCM and the BCM see the thread here
OSE 12P Calibration version migration: If you have an older 12P tune you wish to migrate to the latest, you can use this tool to automate most of the process. The app will show details of new tables added or tables which the resolution has changed. If this is the case you will need to locate those scalars or tables in the output and populate the empty data. Note also that this is designed to work on a cal file. You can migrate a bin but note that it wont add an updated operating system. We recommend to update a cal or bin, save it as cal, then use this tool to upload to an ECM with the right operating system. This will merge the calibration with the right operating system. You can then download the bin to have a complete bin image on your pc.
Common Issues:
The mouse goes crazy when trying to log data. This is a known windows driver issue, the ALDL interface gets detected as a mouse. Use the instructions and Microsoft tool to disable this .. http://support.microsoft.com/kb/819036
Download Here:
Here is the latest version of the program... You will also need the .NET 3.5 framework which can be downloaded from here.
Mod Update 2021-05-10: RKGarage has released a video showing how to use this tool to install the enhnaced mod on a VY Commodore. Thanks RK Garage! https://www.youtube.com/watch?v=rsIQPc_oe1Y
Memcal Based ECU/PCM: The requirements are that the ECM or PCM is fitted with a NVRAM in place of the memcal loaded with a write capabale bin (ie OSE code) and you have an interface for data - either over the vehicles 8192baud ALDL port or an add-on board for the early 160baud ECMs to allow 8192 ALDL
Flash Memory Based ECU/PCM: Before you try anything read the very important information on using the flashtool with a flash based PCM here
For a brief rundown of ALDL and also the device ID of different models of ECM/PCM and the BCM see the thread here
OSE 12P Calibration version migration: If you have an older 12P tune you wish to migrate to the latest, you can use this tool to automate most of the process. The app will show details of new tables added or tables which the resolution has changed. If this is the case you will need to locate those scalars or tables in the output and populate the empty data. Note also that this is designed to work on a cal file. You can migrate a bin but note that it wont add an updated operating system. We recommend to update a cal or bin, save it as cal, then use this tool to upload to an ECM with the right operating system. This will merge the calibration with the right operating system. You can then download the bin to have a complete bin image on your pc.
Common Issues:
The mouse goes crazy when trying to log data. This is a known windows driver issue, the ALDL interface gets detected as a mouse. Use the instructions and Microsoft tool to disable this .. http://support.microsoft.com/kb/819036
Download Here:
Here is the latest version of the program... You will also need the .NET 3.5 framework which can be downloaded from here.
Mod Update 2021-05-10: RKGarage has released a video showing how to use this tool to install the enhnaced mod on a VY Commodore. Thanks RK Garage! https://www.youtube.com/watch?v=rsIQPc_oe1Y