pcmhacking.net

Posted: **Wed Mar 16, 2016 2:53 pm**

so i need to swap from auto to manual in a vx can i just do a write cal of the manual vx bin on the auto ecu and happy days or nah

Posted: **Wed Mar 16, 2016 3:12 pm**

VX-VY V6 flash pcm's are all the same just need to do a write entire & all is good!

Posted: **Wed Mar 16, 2016 4:04 pm**

it wont wipe the bcm-pcm linking writing whole bin?

Posted: **Wed Mar 16, 2016 4:06 pm**

yeah I guess it can as there is 2 sections for the link code, if you have the original bin & the 1 you want to change to I can copy it across for you or just disable VATs

Posted: **Wed Mar 16, 2016 4:07 pm**

You can choose to write the EEPROM data that is specific to the vehicle at the end, choose no as a raw bin wont have that data. Do a full get bin choosing not to clear anything before you begin just in case you need the EEPROM data.

If you use a manual bin that is the same program as the auto bin could do a cal write only.

Posted: **Wed Mar 16, 2016 5:02 pm**

thanks all very much

Posted: **Thu Mar 17, 2016 12:12 pm**

seems to have worked a charm bing bang boom no issues too easy legendary tool

Posted: **Sun Sep 04, 2016 7:37 pm**

I cant seem to install framenet 3.5. i have .net 4.6.1? does this matter? i still cant seem to connect to my vx so this is last resort. have set up text bench and cant connect to that either

Posted: **Mon Sep 05, 2016 11:48 am**

The later framework is fine.

Posted: **Mon Sep 05, 2016 12:19 pm**

VL400 wrote:The later framework is fine.

Hmmmm ok. That makes 2 flash pcms o can't connect too..

pcmhacking.net

Delco OSE FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51

Re: Delco FlashTool V1.51