pcmhacking.net

Having some issues trying to get bin from a 02 vx v6 manual

setup im using, also tried "wait for silence" upto 50


clicking Connect to ECM works ok it comes back with
"Found VX Flash PCM, BCC: DMTY
VIN Of Connected Vehicle: 6H8VXK69A2L84xxxx"

clicking Get Cal/Bin or RAM results in an error

Starting Bin Dumper...
5:04:52 PM Using Uploaded Bin Dumper Routines
5:04:52 PM Requesting 64 Bytes From Address $0
5:04:53 PM No Response, Re-Sending The Request
5:04:53 PM Requesting 64 Bytes From Address $0
5:04:53 PM Got 64 Bytes Of Data
5:04:53 PM Requesting 64 Bytes From Address $40
5:04:53 PM Got 64 Bytes Of Data
5:04:53 PM Requesting 64 Bytes From Address $80
5:04:53 PM Got 64 Bytes Of Data
5:04:53 PM Requesting 64 Bytes From Address $C0
5:04:53 PM No Response, Re-Sending The Request
5:04:53 PM Requesting 64 Bytes From Address $C0
5:04:54 PM No Response, Re-Sending The Request
5:04:54 PM Requesting 64 Bytes From Address $C0
5:04:54 PM No Response, Re-Sending The Request
5:04:54 PM Requesting 64 Bytes From Address $C0
5:04:54 PM No Response, Re-Sending The Request
5:04:54 PM Requesting 64 Bytes From Address $C0
5:04:54 PM Got 64 Bytes Of Data
5:04:54 PM Requesting 64 Bytes From Address $100
5:04:55 PM Got 64 Bytes Of Data
5:04:55 PM Requesting 64 Bytes From Address $140
5:04:55 PM Got 64 Bytes Of Data
5:04:55 PM Requesting 64 Bytes From Address $180
5:04:55 PM No Response, Re-Sending The Request
5:04:55 PM Requesting 64 Bytes From Address $180
5:04:55 PM No Response, Re-Sending The Request
5:04:55 PM Requesting 64 Bytes From Address $180
5:04:56 PM No Response, Re-Sending The Request
5:04:56 PM Requesting 64 Bytes From Address $180
5:04:56 PM Got 64 Bytes Of Data
5:04:56 PM Requesting 64 Bytes From Address $1C0
5:04:56 PM No Response, Re-Sending The Request
5:04:56 PM Requesting 64 Bytes From Address $1C0
5:04:56 PM Got 64 Bytes Of Data
5:04:56 PM Requesting 64 Bytes From Address $200
5:04:56 PM No Response, Re-Sending The Request
5:04:56 PM Requesting 64 Bytes From Address $200
5:04:57 PM No Response, Re-Sending The Request
5:04:57 PM Too Many ReSends, Aborted Task
5:04:57 PM COM3 closed
5:04:57 PM Clean Up The PCM
5:04:57 PM No Response
5:04:58 PM Frame Error

any idea's whats going on with it?

Is it a pcmhacking.net cable or other some don't respond fast enough

got it from envyous customs

Edit.

is it the ELM cable?

https://www.ebay.com.au/itm/USB-ALDL-CA ... 1438.l2649

Thats it there in the link

sounds like interference.... since its getting some data but rejecting others. try turning off your stereo, AC blower, headlights and everything else you can find to turn off, leave the laptop power cable unplugged so its just on battery, then leave engine on reds not running and try again.

So i pulled out a bunch of fuses and it started working fine, placing the fuses back in while it was running found the one that causes the problem.

7.5A fuse labeled
ECC HTR CONT.
INST. TRIP COMP

got a few copies of the bin now
Thanks for the help

vlad01 wrote:Edit.

is it the ELM cable?

Since it got part way through, including identifying the car, it can't be the wrong _type_ of cable.

Ok guys, so I'm new to all of this. I've read and researched until I'm blue in the face. I've hit a stand still. Trying to connect to a flash based PCM. I select the find seed/key and a pop up asks me what hex key I want to start counting up from. I have no idea what this means nor can I find any information about this particular pop up box online.

tuners can change the security key to try and lock other people out. normally you just read or write, but if it fails to unlock you can use that try all the keys and recover it to re-gain access to your computer. normally you would not need to use find seed/key at all.