help connecting with wifi eml327
-
- Posts: 380
- Joined: Thu Jan 16, 2014 12:41 pm
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
help connecting with wifi eml327
I bought a elm327 wifi adapter is says to use static ip as 192.168.0.12 and mask of 255.255.255.0 and port 35000
I seem to kinda be able to connect with my iphone using elm327 terminal app however it seems so warp the commands or something strange
I send send..
>atz
then it says elm327v1.5
but atap2 does nothing
tried the windows elm app scanmaster that came with it.
windows 10 set wifi ip/tcp(4) to 192.168.0.12 gateway 255.255.255.0
and in the scan master WLAN protocol 192.168.0.12 port 35000
and click connect it says traget repeadly refused socket error 10062 my firewall is disabled
any ideas?
I seem to kinda be able to connect with my iphone using elm327 terminal app however it seems so warp the commands or something strange
I send send..
>atz
then it says elm327v1.5
but atap2 does nothing
tried the windows elm app scanmaster that came with it.
windows 10 set wifi ip/tcp(4) to 192.168.0.12 gateway 255.255.255.0
and in the scan master WLAN protocol 192.168.0.12 port 35000
and click connect it says traget repeadly refused socket error 10062 my firewall is disabled
any ideas?
-
- Posts: 583
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: help connecting with wifi eml327
Well, ATAP2 isn't a valid command.. Are you trying to set the protocol? Maybe try ATSP204colyZQ8 wrote:I bought a elm327 wifi adapter is says to use static ip as 192.168.0.12 and mask of 255.255.255.0 and port 35000
I seem to kinda be able to connect with my iphone using elm327 terminal app however it seems so warp the commands or something strange
I send send..
>atz
then it says elm327v1.5
but atap2 does nothing
tried the windows elm app scanmaster that came with it.
windows 10 set wifi ip/tcp(4) to 192.168.0.12 gateway 255.255.255.0
and in the scan master WLAN protocol 192.168.0.12 port 35000
and click connect it says traget repeadly refused socket error 10062 my firewall is disabled
any ideas?
as far as trying that software I have no idea, sorry..
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: help connecting with wifi eml327
If you consider that the V1.5 is NOT an "official" release, there MAY be some commands that don't work.
Try running an ELM ID app to see supported commands.
Mike
Try running an ELM ID app to see supported commands.
Mike
-
- Posts: 380
- Joined: Thu Jan 16, 2014 12:41 pm
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
Re: help connecting with wifi eml327
my bad meant atsp2ironduke wrote:Well, ATAP2 isn't a valid command.. Are you trying to set the protocol? Maybe try ATSP204colyZQ8 wrote:I bought a elm327 wifi adapter is says to use static ip as 192.168.0.12 and mask of 255.255.255.0 and port 35000
I seem to kinda be able to connect with my iphone using elm327 terminal app however it seems so warp the commands or something strange
I send send..
>atz
then it says elm327v1.5
but atap2 does nothing
tried the windows elm app scanmaster that came with it.
windows 10 set wifi ip/tcp(4) to 192.168.0.12 gateway 255.255.255.0
and in the scan master WLAN protocol 192.168.0.12 port 35000
and click connect it says traget repeadly refused socket error 10062 my firewall is disabled
any ideas?
as far as trying that software I have no idea, sorry..
-
- Posts: 380
- Joined: Thu Jan 16, 2014 12:41 pm
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
Re: help connecting with wifi eml327
what app do you suggest?MudDuck514 wrote:If you consider that the V1.5 is NOT an "official" release, there MAY be some commands that don't work.
Try running an ELM ID app to see supported commands.
Mike
Can I test it on my pc as well how do you use a wireless wifi elm327 with putty ?
Re: help connecting with wifi eml327
To use PuTTY with BlueTooth use a COM port, to use with WiFi use an IP address, don't know what port though, that is up to the device ...
-Enjoy
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: help connecting with wifi eml327
For Android, I have used ELM 327 Checker and ELM327 Identifier.04colyZQ8 wrote:what app do you suggest?MudDuck514 wrote:If you consider that the V1.5 is NOT an "official" release, there MAY be some commands that don't work.
Try running an ELM ID app to see supported commands.
Mike
Can I test it on my pc as well how do you use a wireless wifi elm327 with putty ?
Don't know what's available to test them on other platforms.
Mike
-
- Posts: 380
- Joined: Thu Jan 16, 2014 12:41 pm
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
Re: help connecting with wifi eml327
Finally got putty to connect a few times now it’s broken putty won’t let me type anything!!
First of the manual says 192.168.0.12
This is wrong it’s actually 192.168.0.10
Using putty Telnet disable m return
Disable auto warp
Force echo off
Set auto cr
Ip
192.168.0.10
Port 35000
Atz
Worked can works
But at ma doesn’t work
And at sp2 seems to not fully work
Sets protocol
At dp says vpw 1850
But at sh 6c 40 f0
3c 01
No connection
First of the manual says 192.168.0.12
This is wrong it’s actually 192.168.0.10
Using putty Telnet disable m return
Disable auto warp
Force echo off
Set auto cr
Ip
192.168.0.10
Port 35000
Atz
Worked can works
But at ma doesn’t work
And at sp2 seems to not fully work
Sets protocol
At dp says vpw 1850
But at sh 6c 40 f0
3c 01
No connection
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: help connecting with wifi eml327
Some of them need a PCM to respond to a request for pid 01 to set the protocol. Is it connected to a VPW PCM?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 380
- Joined: Thu Jan 16, 2014 12:41 pm
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
Re: help connecting with wifi eml327
no can pcm, vpw bcm. is that an issue? although it is a e67 with can enabled and vpw messages are sent to and from the pcmantus wrote:Some of them need a PCM to respond to a request for pid 01 to set the protocol. Is it connected to a VPW PCM?