3.2L Frontera with Gen3 LS1 PCM
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 3.2L Frontera with Gen3 LS1 PCM
Top work. I dont suppose it just writes out the box too? The file format looks a bit different to what we've seen before, including the signatures. Still has a param block at 0x6000.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: 3.2L Frontera with Gen3 LS1 PCM
Awesome ...kur4o wrote: Meanwhile if you add at end of script
savebin:VPW:?
Still on unreleased beta version
That will parse VPW mode23, Ram and Rom to a bin file
One file for both, or can that be added after each, ROM and RAM thus two files in that script ??
Does ? symbolize a filename (do you replace ? with filename) ??
I did think about trying to write, then I slapped myself to wake up to all the open cans of worms I am already in ... I do suspect it's very possible to write with a little work.
Maybe I should get to it now, the P04 is digging my grave!
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 52
- Joined: Thu Feb 07, 2013 1:49 pm
- cars: 2002 Camaro
2008 Pontiac G8
Re: 3.2L Frontera with Gen3 LS1 PCM
i bought a couple of these for eductional purposes. i polled it with pcm hammer and then lifted the flash and read it out with a GQ 4x4. i did have to flip the whole binary.
[01:19:16:279] PCM Hammer 018
[01:19:16:281] Initializing J2534 Device
[01:19:16:333] Loaded DLL
[01:19:16:743] Connected to the device.
[01:19:16:749] Battery Voltage is: 13.443
[01:19:21:874] VIN: 4S2CE58X534603766
[01:19:42:102] OS ID query failed: Error
[01:19:42:128] Calibration ID: 12225969
[01:19:42:151] Hardware ID: 9376160
[01:19:42:237] Serial Number: 626SLP3205
[01:19:42:269] Broad Cast Code: DSPY
[01:19:42:291] MEC: 0
[01:20:29:415] Will save to C:\Users\Desktophome\Downloads\isuzu read.bin
[01:20:30:707] Querying operating system of current PCM.
[01:20:50:907] Operating system query failed, will retry: Error
[01:21:11:105] Operating system query failed: Error
[01:21:11:109] Unable to get operating system ID. Will assume this can be unlocked with the default seed/key algorithm.
[01:21:11:430] Unlock response truncated, expected 6 bytes, got 5 bytes.
[01:21:11:440] The PCM didn't accept the unlock key value
[01:21:15:463] Unable to process unlock response.
[01:21:15:467] Unlock was not successful.
[01:19:16:279] PCM Hammer 018
[01:19:16:281] Initializing J2534 Device
[01:19:16:333] Loaded DLL
[01:19:16:743] Connected to the device.
[01:19:16:749] Battery Voltage is: 13.443
[01:19:21:874] VIN: 4S2CE58X534603766
[01:19:42:102] OS ID query failed: Error
[01:19:42:128] Calibration ID: 12225969
[01:19:42:151] Hardware ID: 9376160
[01:19:42:237] Serial Number: 626SLP3205
[01:19:42:269] Broad Cast Code: DSPY
[01:19:42:291] MEC: 0
[01:20:29:415] Will save to C:\Users\Desktophome\Downloads\isuzu read.bin
[01:20:30:707] Querying operating system of current PCM.
[01:20:50:907] Operating system query failed, will retry: Error
[01:21:11:105] Operating system query failed: Error
[01:21:11:109] Unable to get operating system ID. Will assume this can be unlocked with the default seed/key algorithm.
[01:21:11:430] Unlock response truncated, expected 6 bytes, got 5 bytes.
[01:21:11:440] The PCM didn't accept the unlock key value
[01:21:15:463] Unable to process unlock response.
[01:21:15:467] Unlock was not successful.
- Attachments
-
- isuzu read flip.bin
- (1 MiB) Downloaded 54 times
-
- Posts: 2885
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: 3.2L Frontera with Gen3 LS1 PCM
Nice work, I haven't seen the vehicle I originally wanted it to read after I mucked around with throttle body & suggested replacing it.
-
- Posts: 52
- Joined: Thu Feb 07, 2013 1:49 pm
- cars: 2002 Camaro
2008 Pontiac G8
Re: 3.2L Frontera with Gen3 LS1 PCM
i found the MAF table its split Low and High i used a GM scale factor and looked reasonable on the data. I also found the dtcs which are like some of the Big truck Isuzu stuff ive seen as in not in order. The dtc right next the the hex code. I didnt go though and convert the whole hex to SAE but you get the idea.. found this stuff in Winols and exported to an xdf
- Attachments
-
- isuzu maps.xdf
- (7.04 KiB) Downloaded 52 times
-
- isuzu-read-flip.bin
- (1 MiB) Downloaded 46 times