3.2L Frontera with Gen3 LS1 PCM

[antus]

Top work. I dont suppose it just writes out the box too? The file format looks a bit different to what we've seen before, including the signatures. Still has a param block at 0x6000.

[Gampy]

Meanwhile if you add at end of script
savebin:VPW:?
Still on unreleased beta version


That will parse VPW mode23, Ram and Rom to a bin file

Awesome ...
One file for both, or can that be added after each, ROM and RAM thus two files in that script ??

Does ? symbolize a filename (do you replace ? with filename) ??

I did think about trying to write, then I slapped myself to wake up to all the open cans of worms I am already in ... I do suspect it's very possible to write with a little work.

Maybe I should get to it now, the P04 is digging my grave!

-Enjoy

[roughneck427]

i bought a couple of these for eductional purposes. i polled it with pcm hammer and then lifted the flash and read it out with a GQ 4x4. i did have to flip the whole binary.

[01:19:16:279] PCM Hammer 018
[01:19:16:281] Initializing J2534 Device
[01:19:16:333] Loaded DLL
[01:19:16:743] Connected to the device.
[01:19:16:749] Battery Voltage is: 13.443
[01:19:21:874] VIN: 4S2CE58X534603766
[01:19:42:102] OS ID query failed: Error
[01:19:42:128] Calibration ID: 12225969
[01:19:42:151] Hardware ID: 9376160
[01:19:42:237] Serial Number: 626SLP3205
[01:19:42:269] Broad Cast Code: DSPY
[01:19:42:291] MEC: 0
[01:20:29:415] Will save to C:\Users\Desktophome\Downloads\isuzu read.bin
[01:20:30:707] Querying operating system of current PCM.
[01:20:50:907] Operating system query failed, will retry: Error
[01:21:11:105] Operating system query failed: Error
[01:21:11:109] Unable to get operating system ID. Will assume this can be unlocked with the default seed/key algorithm.
[01:21:11:430] Unlock response truncated, expected 6 bytes, got 5 bytes.
[01:21:11:440] The PCM didn't accept the unlock key value
[01:21:15:463] Unable to process unlock response.
[01:21:15:467] Unlock was not successful.

[VX L67 Getrag]

Nice work, I haven't seen the vehicle I originally wanted it to read after I mucked around with throttle body & suggested replacing it.

[roughneck427]

i found the MAF table its split Low and High i used a GM scale factor and looked reasonable on the data. I also found the dtcs which are like some of the Big truck Isuzu stuff ive seen as in not in order. The dtc right next the the hex code. I didnt go though and convert the whole hex to SAE but you get the idea.. found this stuff in Winols and exported to an xdf