Thread removed by user

Want a chip to suit your application? Ask here. Include as much detail in your request as possible.
Thomas2004Rodeo
Posts: 26
Joined: Sat Oct 28, 2023 8:53 pm
cars: A rusty fucked tricyle with one wheel

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by Thomas2004Rodeo »

Thread removed by user
Last edited by Thomas2004Rodeo on Mon Nov 06, 2023 1:22 pm, edited 1 time in total.
immortality
Posts: 3426
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by immortality »

Thomas2004Rodeo wrote:
Spark ADV.PNG
small increase in this zone (maybe 1-2 Deg)
Make sure you have good fuel in it.
Thomas2004Rodeo wrote:
Spark ADV ext.PNG
Small increase up here also ( maybe in vein as I dont know what a NA can really pull in MGC at WOT )
n/a you won't get into this table at all, that is boost territory where you need a bigger MAF to be able to measure airflow that high

IIRC (it's been a very long time since I played with a stock n/a ecotec) you will be somewhere in the 550mgc + range at WOT but you really need to get a log to be sure.
Thomas2004Rodeo wrote: My Closed loop fuel ratio is unchanged at 14.76:1
Fuel Map.PNG
I have smothed the edges slightly as not to go from 14 to 13/12 in a cell ( heard big jumps were bad )
There is no point in modifying this table as it makes no difference when you are at WOT as the tune will operate in PE mode. That open loop table is really only used during cold starts and if there is a fault that forces the PCM out of closed loop mode (like a faulty O2 sensor).
immortality
Posts: 3426
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by immortality »

Hold fire. I've given you a bum steer here. From VS to VT there were some minor changes in the PE settings. DO NOT ZERO out those tables.
Thomas2004Rodeo wrote:
PE vs Time.PNG
Zero values

PE vs RPM.PNG
zero these values to ( I missed this in the first read)
The spread sheet is based of the $51 VS tune. Let me re-work it to suit VT.
Thomas2004Rodeo
Posts: 26
Joined: Sat Oct 28, 2023 8:53 pm
cars: A rusty fucked tricyle with one wheel

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by Thomas2004Rodeo »

Thread removed by user
Last edited by Thomas2004Rodeo on Mon Nov 06, 2023 1:22 pm, edited 1 time in total.
immortality
Posts: 3426
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by immortality »

The spreadsheet provided for the PE calculations was originally for the VS tune where the table show %age change where as for the VT those tables are a multiplier however I don't believe the spread sheet can handle those numbers and it's a bit above my excel spread sheet skills to fix that so that might need someone better than I to sort.

The1 I believe originally did the spreadsheet so I'll copy him into this and ask the question.
immortality
Posts: 3426
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by immortality »

This is apparently the correct excel spreadsheet to suit VT.

download/file.php?id=9041

But it's coming up with a error for me and not working atm. Will need to wait until the boss is finished in the office so I can upload to my desktop and have a proper look at it.
Thomas2004Rodeo
Posts: 26
Joined: Sat Oct 28, 2023 8:53 pm
cars: A rusty fucked tricyle with one wheel

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by Thomas2004Rodeo »

Thread removed by user
Last edited by Thomas2004Rodeo on Mon Nov 06, 2023 1:25 pm, edited 1 time in total.
immortality
Posts: 3426
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by immortality »

I'm using the online option as I don't have excel on my laptop and it does not seem to want to run but the other $51 PE does. Bit odd really.
Thomas2004Rodeo
Posts: 26
Joined: Sat Oct 28, 2023 8:53 pm
cars: A rusty fucked tricyle with one wheel

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by Thomas2004Rodeo »

Thread removed by user
Last edited by Thomas2004Rodeo on Mon Nov 06, 2023 1:22 pm, edited 1 time in total.
immortality
Posts: 3426
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Help needed. VT V6 swapped 2004 rodeo tune. Happy to pay

Post by immortality »

Basically yes. It's always good to be able to monitor commanded AFR's to confirm what you want to happen is happening.

I've not done a VT ecotec before and it looks like the PE tables have changes somewhat from VS so they aren't quite as bad.
Post Reply