kur4o wrote: ↑Fri Feb 16, 2024 3:02 am That is partly due to missing tutorial.
Can you give some screenshot what happens or log, is there any idle traffic from ipc on screen.
The usual usage will be
settings-> select device->configure device->connect button.
Thanks for all your help! I really do need to take some time and learn this tool. I had a pop up log window but it only showed what was being sent to the cluster. Will try to get a screen shot
On vpw console there is various checkboxs->
->>screen checkbox prints traffic to screen
->>file checkbox dumps traffic to file
-->buffered checkbox displays only one screen at a time of data->to overcome slow performance with heavy traffic, slow cpu[On vpw you can uncheck it]
To upload script click script button and select script file]
To send custom messages to bus-> print message on the message dialog , below traffic dialog and press enter.
2004 to 2012 Colorado and 2006 -10 h3 cluster programming
-
- Posts: 380
- Joined: Thu Jan 16, 2014 12:41 pm
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
Re: 2004 to 2012 Colorado and 2006 -10 h3 cluster programming
- Gatecrasher
- Posts: 278
- Joined: Sat Apr 25, 2020 6:09 am
Re: 2004 to 2012 Colorado and 2006 -10 h3 cluster programming
I checked my CS+ install and it doesn't have any of the PRM files you're looking for.
PRM is for 78K and V850. PR5 is for RL78.
PRM is for 78K and V850. PR5 is for RL78.
-
- Posts: 380
- Joined: Thu Jan 16, 2014 12:41 pm
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
Re: 2004 to 2012 Colorado and 2006 -10 h3 cluster programming
Ok thanks no use anyway since we can’t get a pinout!