pcmhacking.net

Any chance anyone would have OSE 12P tune I could use as a starting point to suit the following:
VR V8 stroked to 383cuin
Camshaft with the following specs:
C.O.M.E CSBH222, 273deg Adv Duration, 222 deg 0.050 duration, 0.313" and 0.312" lobe lift, 0.501" and 0.499" valve lift, 110 deg lobe seperation.
Inlet manifold: Torque Power hi-rise dual plane with 1000cfm throttle body.
Exhaust: Pacemaker tri-y with dual 3" cats and dual 2.5" pipes.

I am in the process of completing a ECM/PCM test bench setup and have already got NVRAM, emulator and USB comms devices ( thanks to VL400).

Thanks in advance for any assistance provided.

I dont have anyhting you can use.. but whoever does will also need to know your injector specs

email me with your comp ratio and injector size and ill try to help


ttvn@exemail.com.au