Page 1 of 1
Slight Problem With Connection
Posted: Mon Aug 11, 2014 2:31 pm
by rus
Long story short. I flashed a new cal to my vy v6 commodore ute and selected mode 13? Anyway, I can connect and flash across to the vehicle but I cannot log any data anymore. Is there a way to fix this?
thanks
Re: Slight Problem With Connection
Posted: Sat Aug 16, 2014 1:45 pm
by antus
Im not sure why that would happen. Try going back to stock, test comms, try again with your changes one at a time and see what breaks it?
Re: Slight Problem With Connection
Posted: Tue Sep 02, 2014 6:13 pm
by rus
Tried going back to the beginning but no good. Tried selecting mode 11 (13 was selected) and rewriting but that doesn't work. I can still write just can't record/view live data.
Re: Slight Problem With Connection
Posted: Tue Sep 02, 2014 7:24 pm
by VL400
You shouldnt need to set the read or write modes in the flashtool (I assume this is what you are using to write a cal?).
What PCM is this, a NA V6 flash PCM or a memcal based S/C?
What ADX are you using in TunerPro for logging?