Well its taken far too long to get to this point but we are on the home stretch! Finally got some colour on the car and shes looking fantastic! FX1.jpg Claire has been keen to get the car back home (after painting) and she was keen to help me put the engine together! FX2.jpg engine is in and running...

is actual Engine TDC the mark to the right of the 300 ? if it is that should be pretty close with the longer slots you have!

you should be able to crank the engine over with no plugs installed and a timing light on it and see where the static timing is before you even try to fire it .....

It been a while in the making but i have finally gotten to a point where i have enough to make a post!! so the board has improved a bit .... but also it had to be changed to suit a new mcupro as the old one is no longer available..... i was also trying to use an on board usb port for robustness whic...

i dont see how that is possible, if its only got a crank signal it cant know when its on inlet v's exhaust stroke when firing the injectors .... unless its actually like wasted spark where it fires the injectors twice per 720 degrees

id be keen to give one a try too!

I use Altium but im sure i can export it into a format you can use!

i have a footprint for the 808 Delco connector if you need it, if you havent already drawn one up it might save you some time!

good to hear mate!

Macca97 wrote:202s are still readily available, that poor block is just a conversation piece now. if you red low on blocks sam, ive got probably 10 red ones

Thanks man, still got a few in the stash!

looking good man!