265 Hemi to efi

Converting To Delco ECU From Carby Or Other Injection Systems
Posts: 677
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Thu Feb 28, 2019 5:52 am

Thanks for the replies, it’s more of an experiment than anything. I have a spare motor and other efi hardware bits lying around and Want to put together a sequential EFI setup for cheap.

Posts: 677
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Fri Mar 01, 2019 6:00 am

I pretty much found the answer here. Stick with the 808

viewtopic.php?f=15&t=1636

Posts: 677
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Apr 15, 2019 8:59 am

Hi all, this area had been annoying me for a while and I knew there was something ugly under there. They must of had a rear quarter replaced and where they joined the two panels together was a ton of bog. They just caved the two panels in and stitch welded. When I cut it open it came back a lot closer to the correct position so not so much filler was required. Once I welded it together I filled the welded join area with reofill so its no to be problem again.

RQ1.JPG
RQ1.JPG (87.41 KiB) Viewed 112 times


RQ2.JPG
RQ2.JPG (86.29 KiB) Viewed 112 times


RQ3.JPG
RQ3.JPG (99.83 KiB) Viewed 112 times


RQ4.JPG
RQ4.JPG (97.12 KiB) Viewed 112 times


Still a bit of work required on the body line.

RQ5.JPG
RQ5.JPG (88.04 KiB) Viewed 112 times

User avatar
Posts: 9617
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 265 Hemi to efi

Postby Holden202T » Mon Apr 15, 2019 1:04 pm

nice job, looked pretty dodgy before hand!

Posts: 677
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Apr 15, 2019 2:01 pm

Thanks Sam, just has got me stuffed why they caved it in so far and why they plug welded it. It took me about 15 minutes to weld it properly. I ground about 1/2 an inch of bog out of the repair and put back in a couple of mm of reofill.

Posts: 144
Joined: Wed Jan 07, 2015 1:21 pm
Location: Mid North Coast

Re: 265 Hemi to efi

Postby Macca97 » Mon Apr 15, 2019 5:47 pm

looks alot better, even for a northshore volvo ;), its crazy some of the old repairs that were done back in the day
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell

Posts: 677
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Apr 15, 2019 6:13 pm

Macca97 wrote:looks alot better, even for a northshore volvo ;), its crazy some of the old repairs that were done back in the day

Ha, ha haven't heard that term for a Val before.

Posts: 696
Joined: Tue Jul 21, 2009 10:02 am

Re: 265 Hemi to efi

Postby v6bucket » Tue Apr 16, 2019 6:45 am

heff0018 wrote:
Macca97 wrote:looks alot better, even for a northshore volvo ;), its crazy some of the old repairs that were done back in the day

Ha, ha haven't heard that term for a Val before.

Also called a "Marrickville Mercedes"
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---

Posts: 677
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Tue Apr 16, 2019 6:47 am

Ha, yeah reckon I have heard thAt term before

Previous

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 2 guests