VS-VY Enhanced Factory Bins

For discussion and distribution of custom code and hacks
User avatar
Posts: 2379
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: The1's Enhanced Factory Bins

Postby Gareth » Thu Jul 14, 2022 10:25 am

charlay86 wrote:Is anyone interested in flex fuel support?


Yes, I am :thumbup:
According to chemistry, alcohol is a solution...

User avatar
Posts: 576
Joined: Thu Sep 17, 2009 2:00 pm
Location: Perth, WA

Re: The1's Enhanced Factory Bins

Postby charlay86 » Fri Jul 15, 2022 11:05 pm

Gareth wrote:
charlay86 wrote:Is anyone interested in flex fuel support?


Yes, I am :thumbup:


Noted.
There seems to be a spare input capture channel available that could be used to read the PWM output signal from a GM flex fuel sensor. :comp:

Posts: 178
Joined: Fri Jul 09, 2010 10:01 pm

Re: The1's Enhanced Factory Bins

Postby 0081 » Sun Jul 17, 2022 11:27 am

charlay86 wrote:
Gareth wrote:
charlay86 wrote:Is anyone interested in flex fuel support?


Yes, I am :thumbup:


Noted.
There seems to be a spare input capture channel available that could be used to read the PWM output signal from a GM flex fuel sensor. :comp:


Flex fuel would be awesome

Posts: 3
Joined: Sat Jun 26, 2021 10:18 pm

Re: The1's Enhanced Factory Bins

Postby twiztidditzwit » Sat Aug 20, 2022 5:56 am

'quipt4it wrote:These are Flash PCM's I believe. No chip to remove/ replace. I think they dub it OBD1.5.
Swapping in an earlier ECM would probably be the go...



What would you suggest to be the best fit for a 95 v6 sfi rwd auto trans?

User avatar
Posts: 576
Joined: Thu Sep 17, 2009 2:00 pm
Location: Perth, WA

Re: The1's Enhanced Factory Bins

Postby charlay86 » Sun Aug 21, 2022 11:36 pm

twiztidditzwit wrote:What would you suggest to be the best fit for a 95 v6 sfi rwd auto trans?


This code is specifically for the Holden 5l V8 and 3.8l 90° V6 motors, with a P6 type PCM. We have real time support on the earlier models that were fitted with a memcal, but not on the later models with flash memory. Real time support is achieved by installing a NVSRAM instead of the memcal eprom.

Your PCM is a very different beast.
I'm somewhat familiar with it as I helped Xnke get his boosted truck working, but I've never actually seen one in the flesh.

Does it still have a location for a memcal header?
If it does, i'd suggest the simplest thing to do would be to remove the flash ic and install the header and try to get hold of an ostrich 2.0.

Posts: 173
Joined: Mon Dec 12, 2016 11:27 am

Re: VS-VY Enhanced Factory Bins

Postby L67PSI » Mon Sep 12, 2022 4:49 pm

Hi guys, I've flashed the VY V6 enhanched code into my VY with a spare PCM using OSE flashtool. Is it possible to adjust the VIN to the correct one? It functions fine, just that it shows the old vehicle VIN.

Thanks

Previous

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 1 guest