Real Time Modded Factory Bins

For discussion and distribution of custom code and hacks
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm

Re: Real Time Modded Factory Bins

Postby turbov8 » Tue Nov 30, 2010 7:49 pm

what a guy!!
cheers

User avatar
Posts: 4988
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Real Time Modded Factory Bins

Postby VL400 » Tue Nov 30, 2010 7:57 pm

One thing to be aware of is its using a 0-25.5v input so the resolution aint great when using a 0-5v output from the wideband (WIth it set for 10-20 AFR you wont get better than 0.2 AFR resolution on the reading).

If your wideband analog output is configurable then maybe knock the range down to what you expect to need to for tuning say 11-16 AFR. This will give you 0.1 AFR resolution.

Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm

Re: Real Time Modded Factory Bins

Postby turbov8 » Tue Nov 30, 2010 8:05 pm

just confused about the input for the wideband
D7 looks like oxy sensor input??

User avatar
Posts: 4988
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Real Time Modded Factory Bins

Postby VL400 » Tue Nov 30, 2010 8:09 pm

VR V8 Auto is D7 for inj feedback, I think your looking at the manual diagram.

Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm

Re: Real Time Modded Factory Bins

Postby turbov8 » Tue Nov 30, 2010 8:13 pm

i must be!! damn been labeled wrong
cheers

User avatar
Posts: 9629
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Real Time Modded Factory Bins

Postby Holden202T » Tue Nov 30, 2010 9:01 pm

yeah vr vs v8 auto are d7 for injector line ... if you want to test it, touch it to earth and you'll blow the injector fuse ;)

Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm

Re: Real Time Modded Factory Bins

Postby turbov8 » Wed Dec 01, 2010 3:20 pm

Holden202 wrote:yeah vr vs v8 auto are d7 for injector line ... if you want to test it, touch it to earth and you'll blow the injector fuse ;)


theres no need. i trust u guys. the things that have been accomplished by members of this site is amazing!!!!

User avatar
Posts: 569
Joined: Wed Jan 27, 2010 9:45 pm
Location: Melbourne, VIC

Re: Real Time Modded Factory Bins

Postby krusty » Sun Apr 24, 2011 5:26 pm

Regarding the first post in this thread........

The below bin is available for download and is labelled as a VY s/c/ HSV tune which is DLTK to my knowledge. The XDF suggested is $A5K which is VT V6 and loads up fine in TP.

Question is, where did this bin come from as I'm under the impression it is modded and isn't a factory bin. I wouldn't mind writing something off to try in my VY L67.

VY S/C
Bin:
DDRJ_mod.zip
VY V6 S/C, XU6. A5K xdf is needed
(46.68 KiB)

Site Admin
User avatar
Posts: 5629
Joined: Sat Feb 28, 2009 8:34 pm

Re: Real Time Modded Factory Bins

Postby antus » Mon Apr 25, 2011 2:08 pm

Yeah DDRJ looks like the vx s/c HSV variant which is why VL400 picked that one to do. As I understand it it will work on a VY. The s/c code is still based on the VT for vx and vy and runs from a memcal (not the vx/vy flash pcm). These bins are the factory ones, write code patched in to them to them to add the realtime functionality when running from NVRAM.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 4091
Joined: Mon Jan 04, 2010 10:23 am

Re: Real Time Modded Factory Bins

Postby The1 » Tue Aug 23, 2011 9:23 am

Putting a wideband in a VS V6 Auto here, using NVRAM for realtime tuning and have done the mod with pin B12 for wideband 0-5v feedback, it's logging fine in Tunerpro but car wont run, just starts then stalls basicly, from looking at different wiring diagrams it seems that pin B12 supplys the DFI module as well? Or am i miss reading something?

PreviousNext

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 1 guest