VXDiag VCX Nano

Programs / Tools / Scripts
Posts: 332
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: VXDiag VCX Nano

Postby In-Tech » Mon Apr 05, 2021 10:35 am

Gampy wrote:Must of had your beer goggles on ... :lol:

I've been known to resemble that remark :mrgreen:

Posts: 138
Joined: Tue Oct 25, 2011 7:47 pm
Location: Vic

Re: VXDiag VCX Nano

Postby jxx » Mon Apr 05, 2021 10:53 am

vs ss wrote:Gampy,I do t know if these are the photos you want but I have a couple of mine.


I can't tell from the pics, but does pin 9 goto unpopulated FB20 or FB21 thru a via and tracks?

Posts: 485
Joined: Thu Nov 03, 2011 7:57 pm
Location: perth wa

Re: VXDiag VCX Nano

Postby vs ss » Mon Apr 05, 2021 11:47 am

42FF48A7-3ADF-4A31-ABC8-FE6036923928.jpeg


I can't tell from the pics, but does pin 9 goto unpopulated FB20 or FB21 thru a via and tracks?[/quote]

No, it appears to have the pad for pin 9 to be soldered onto but has no tracks coming off it. On the opposite side of the board it only has one track off of pin 5 that goes through the board and terminates on the track you see in front of fb21.
I put another pic up that might help a bit better.

User avatar
Posts: 4474
Joined: Mon Jan 04, 2010 10:23 am

Re: VXDiag VCX Nano

Postby The1 » Tue Apr 06, 2021 3:50 pm

i probed pin9 it doesn't link to anything. The ST chip anyway doesn't seem to support uart.

User avatar
Posts: 2424
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: VXDiag VCX Nano

Postby Tazzi » Wed Apr 07, 2021 12:48 pm

Yeah, I double checked again now, and it doesnt run to any nearby pad or component (Verifying incase it was running on an internal layer).

When I spoke to the devs a while ago, they said they didnt have any vehicles to test on which had GM UART couldn't test. I was hoping that meant they at least had the hardware there but appears not.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

User avatar
Posts: 4474
Joined: Mon Jan 04, 2010 10:23 am

Re: VXDiag VCX Nano

Postby The1 » Wed Apr 07, 2021 9:44 pm

Not sure if this is worth bothering with, I pulled my $25 aliexpress tactrix cable apart, pin 9 is hooked upto the chip pin 3rd down from top on the left. Infineon TLE6208 main IC is NXP LPC2366FBD100 which has 4 uarts.

IMG_20210407_211409.jpg

Posts: 170
Joined: Wed Jul 05, 2017 8:30 am
Location: TX USA

Re: VXDiag VCX Nano

Postby MudDuck514 » Tue Apr 13, 2021 3:01 pm

Hi all;

Anyone have a source for known good VCX Nanos?

I'm wanting to get one for working on my car and van.

Mike.

User avatar
Posts: 1087
Joined: Sat Dec 15, 2018 7:38 am

Re: VXDiag VCX Nano

Postby Gampy » Tue Apr 13, 2021 7:12 pm

Improve Knowledge -=- Share Yours!

Posts: 170
Joined: Wed Jul 05, 2017 8:30 am
Location: TX USA

Re: VXDiag VCX Nano

Postby MudDuck514 » Wed Apr 14, 2021 1:03 am

Thanks Gampy.

I must have been daydreaming when I saw that post due to the pretty pictures!

Mike

User avatar
Posts: 1087
Joined: Sat Dec 15, 2018 7:38 am

Re: VXDiag VCX Nano

Postby Gampy » Wed Apr 14, 2021 1:58 am

Thank you, I really needed that laugh!
Improve Knowledge -=- Share Yours!

PreviousNext

Return to Tools

Who is online

Users browsing this forum: No registered users and 6 guests