Ford binary on a Delco 808

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
User avatar
Posts: 17
Joined: Thu Mar 24, 2022 6:29 pm
Location: Gold Coast, Queensland

Ford binary on a Delco 808

Postby Vaxx » Thu Jul 07, 2022 9:37 pm

OK, with my frankenstiened AU 5.0l running an EL dizzy with sensor and delco from an VN. 2 pairs of BMW 1200 throttle bodies from bike on a custom manifold backed up by a fully manulised btr auto

Runs ok, but with the engine differences the VN ASBX memcal.

I'm trying to chance the timing specs to suit the ford. Hopefully I'm going the right direction with the mods I have made in Tunerpro.

I started with OSE $12P V112 BLCF V8 and have modded the timing differences in the scalars.
Do I have to modify the tables for the spark vs map to suit or are the tables for the ecu to use a base when needed?

I've attached the modded file for help hopefully . Would like to see thing thing running well with 8 individual throttle bodies :)

Cheers, Geoff
Attachments
WINDSOR.BIN
(32 KiB) Downloaded 16 times

Posts: 3276
Joined: Mon Aug 02, 2010 6:35 pm

Re: Ford binary on a Delco 808

Postby Dylan » Thu Jul 07, 2022 10:21 pm

We need pics of this Frankenstein it sounds wicked

User avatar
Posts: 2374
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: Ford binary on a Delco 808

Postby Gareth » Fri Jul 08, 2022 7:50 am

second that :thumbup:
According to chemistry, alcohol is a solution...

User avatar
Posts: 17
Joined: Thu Mar 24, 2022 6:29 pm
Location: Gold Coast, Queensland

Re: Ford binary on a Delco 808

Postby Vaxx » Fri Jul 08, 2022 6:35 pm

i do have the build pics on instagram :) https://www.instagram.com/vaxx70/

Have'nt posted since I've been driving it, to busy with trying to get this thing right now
Attachments
IMG_1810.JPG
EPAI4885.JPG
1DC7F2F3-C510-4681-BB00-D3F384519F89.jpeg

User avatar
Posts: 17
Joined: Thu Mar 24, 2022 6:29 pm
Location: Gold Coast, Queensland

Re: Ford binary on a Delco 808

Postby Vaxx » Fri Jul 08, 2022 6:36 pm

i'll have to take a few new pics, got a bit of battle damage, and I have the stepside rear almost done apart from getting stoved in the arse the other day. Good thing I hadn't done much on the back and he ate the towbar :D

User avatar
Posts: 17
Joined: Thu Mar 24, 2022 6:29 pm
Location: Gold Coast, Queensland

Re: Ford binary on a Delco 808

Postby Vaxx » Fri Jul 15, 2022 7:38 pm

OK, been playing with 12p code to get a good tune on this thing. Starting to get a handle on everything.

New eproms finally got here and have tried a few bin's.

Attached are what I'm working with. Only issue I have been having is when it's cold, runs like a bag of shit until it's up to temp, then fairly grunty if a tad thursty. 3.7 rear end doesnt help with 235/35/18 rears :wall:
still haven't got the tacho back in after gutting it and installing a shift light tacho I have into the case to keep it all matching.

If anyone has any suggestions I'm happy to take it on board.

So far no pinging yet so could push the advance up , but yet to redo the accelerator linkage to get more than 60% throttle :)
Attachments
WLEAN.BIN
Starting to get good power
(32 KiB) Downloaded 17 times
leanv8.bin
moving the afr around
(64 KiB) Downloaded 17 times
WINDSOR.BIN
Start tune with timing modded
(32 KiB) Downloaded 16 times

User avatar
Posts: 17
Joined: Thu Mar 24, 2022 6:29 pm
Location: Gold Coast, Queensland

Re: Ford binary on a Delco 808

Postby Vaxx » Tue Jul 26, 2022 5:34 pm

Have ended up leaning out the cooler areas to help stop fouling the plugs initially.

Ran it today with no issues, nice and docile with plenty of go when wanted. I do have an issue with spark at high rpms, but thinking the caps my problem there.
Attachments
WLEAN5.BIN
(32 KiB) Downloaded 12 times

User avatar
Posts: 559
Joined: Thu Sep 17, 2009 2:00 pm
Location: Perth, WA

Re: Ford binary on a Delco 808

Postby charlay86 » Wed Jul 27, 2022 10:26 am

Do you have a wideband lambda setup?
We can help a lot more with some log files :)
I have a feeling you will need some work in the AE department with that intake setup.

Return to Chip/Memcal Reading/Writing

Who is online

Users browsing this forum: No registered users and 1 guest