2005 Ford F-150 5.4L 3-valve bin maps (Black Oak)

Ford information and tools can be found here
Posts: 135
Joined: Sat Dec 18, 2021 8:15 am
Location: New Jersey, USA

2005 Ford F-150 5.4L 3-valve bin maps (Black Oak)

Postby darkman5001 » Sun May 01, 2022 12:14 am

Good morning to all. Would anyone happen to have the engine calibration, diagnostics and DTC maps for a 5.4L 3-valve using the Black Oak P221 PCM? I already have dumped the bin from 3 identical PCMs now I want to run it through a tuner such as Universal Patcher to try and edit some things such as VVT Delete and some other things. Thank you in advance.
Attachments
Ford F-150 5.4L 3v.rar
(1.08 MiB) Downloaded 21 times

Posts: 540
Joined: Sun Apr 10, 2016 9:20 pm

Re: 2005 Ford F-150 5.4L 3-valve bin maps (Black Oak)

Postby kur4o » Thu May 12, 2022 3:15 am

I looked at the files but are too different to figure any checksum pattern. Are they dumped from chips, or some tools is used.
The processor looks like ppc, but some picture might help figuring the pcm family.

Posts: 135
Joined: Sat Dec 18, 2021 8:15 am
Location: New Jersey, USA

Re: 2005 Ford F-150 5.4L 3-valve bin maps (Black Oak)

Postby darkman5001 » Thu May 12, 2022 12:21 pm

kur4o wrote:I looked at the files but are too different to figure any checksum pattern. Are they dumped from chips, or some tools is used.
The processor looks like ppc, but some picture might help figuring the pcm family.


Actually, I used this to pull the flash. https://pcmhacking.net/forums/viewtopic.php?f=3&t=7722

As far as I know yes it does have a PowerPC cpu. The PCM is a P221 made by Motorola.

Posts: 540
Joined: Sun Apr 10, 2016 9:20 pm

Re: 2005 Ford F-150 5.4L 3-valve bin maps (Black Oak)

Postby kur4o » Thu May 12, 2022 7:38 pm

That is really interesting. I will test the other bins posted for some patterns. I checked the pcm on ebay and looks very similar to dodge ngc3 motorola unit. I am sure they share some similarities. Too bad I never figured that ngc3 checksum algorithm.

Return to Ford ECUs

Who is online

Users browsing this forum: No registered users and 2 guests