PCM Hammer P12 development

[antus]

This is the OS segment you need, I dont have a complete file but if you make it line up you should find the flipped bit.

[Sleepy Profile]

This is the OS segment you need, I dont have a complete file but if you make it line up you should find the flipped bit.

Strange the first 0x18000 Bytes do match then after that my file has what apparently is the speedometer cal.

12597778_Compare.PNG (39.75 KiB) Viewed 1441 times

12597778.PNG (24.76 KiB) Viewed 1441 times

[antus]

can you post yours up?

[Sleepy Profile]

can you post yours up?

Here it is.

12597778_corupt.bin

(1 MiB) Downloaded 57 times

[antus]

It looks like the OS segment is split, part at the start of the file, part after the calibration segments etc. Apply a 163840 byte offset (decimal) to verify the second part. This aligns the SPS bin with the end of your file and the data then matches from the point you have highlighted to the end. Your bit flip is at 45D9F in your file which is F9 in the corrupt file and its F8 in the factory file.

[Sleepy Profile]

Thank you so much. I have some questions about reversing the OS now, but I will find a better thread.

[bill12690 Profile]

I'd like to share the bin from my 04 Ion Redline donor PCM. This was an LSJ/5 speed P12 car. I wish I knew more about the XDF development process, I'd be down to help. I've also cross-posted this in the PCM Hammer 021 release thread as well.

[06:32 22:011] PCM Hammer 021
[06:32:22:013] Friday, December 23 2022 @06:32:22:01
[06:32:22:466] Device Found: OBDX Pro GT
[06:32:22:499] Device Successfully Initialized and Ready
[06:32:24:669] VIN query failed: Timeout
[06:32:26.632] VIN query failed: Timeout
[06:32:29:650] VIN query failed: Timeout
[06:33:01:4211 VIN: 1G8AY12P34Z207779
[06:33:01:459] OS ID: 12597978
[06:33:01:468] Hardware Type: P12
[06:33:01:519] Calibration ID: 0
[06:33:01:6371 Serial Number: 4131KE005
[06:33:01:681] Broad Cast Code: YKHW
[06:33:01:717] MEC: 0
[06:33:15:899] Will save to C:\Users\k_blo\Downloads\Pcm Hammer021\LSJ.bin
[06:33:25:897] Querying operating system of current PCM.
[06:33:25 934] OSID: 12597978
[06:33:26:039] Unlock succeeded.
[06:33:26:055] Attempting switch to VPW 4x
[06:33:26:097] Module Ox10 (engine controller) has agreed to enter high-speed mode
[06:33:28:027] Kernel upload 49% complete.
[06:33:28:826] Kernel upload 100% complete.
[06:33:29:453) Kernel Version: 0103050C
[06:33:29:460] kemel uploaded to PCM succesfully. Requesting data...
[06:33:29:474] Flash chip: AMD AM29BL802C, 1mb

[spyder09 Profile]

I'd like to share the bin from my 04 Ion Redline donor PCM. This was an LSJ/5 speed P12 car. I wish I knew more about the XDF development process, I'd be down to help. I've also cross-posted this in the PCM Hammer 021 release thread as well.

[06:32 22:011] PCM Hammer 021
[06:32:22:013] Friday, December 23 2022 @06:32:22:01
[06:32:22:466] Device Found: OBDX Pro GT
[06:32:22:499] Device Successfully Initialized and Ready
[06:32:24:669] VIN query failed: Timeout
[06:32:26.632] VIN query failed: Timeout
[06:32:29:650] VIN query failed: Timeout
[06:33:01:4211 VIN: 1G8AY12P34Z207779
[06:33:01:459] OS ID: 12597978
[06:33:01:468] Hardware Type: P12
[06:33:01:519] Calibration ID: 0
[06:33:01:6371 Serial Number: 4131KE005
[06:33:01:681] Broad Cast Code: YKHW
[06:33:01:717] MEC: 0
[06:33:15:899] Will save to C:\Users\k_blo\Downloads\Pcm Hammer021\LSJ.bin
[06:33:25:897] Querying operating system of current PCM.
[06:33:25 934] OSID: 12597978
[06:33:26:039] Unlock succeeded.
[06:33:26:055] Attempting switch to VPW 4x
[06:33:26:097] Module Ox10 (engine controller) has agreed to enter high-speed mode
[06:33:28:027] Kernel upload 49% complete.
[06:33:28:826] Kernel upload 100% complete.
[06:33:29:453) Kernel Version: 0103050C
[06:33:29:460] kemel uploaded to PCM succesfully. Requesting data...
[06:33:29:474] Flash chip: AMD AM29BL802C, 1mb

12597978 is an 04 OS, 12610624 is an 07 OS

[bill12690 Profile]

12597978 is an 04 OS, 12610624 is an 07 OS

Sorry, wrong BIN somehow attached. Edited and uploaded the correct BIN. This is from an 04, not an 07. I'm actually not sure at the moment where exactly I even found the 07 BIN.
edit: the 07 bin was another LSJ car, but found on the gearhead-efi forum. I evidently just clicked the wrong one at the original upload.

[Lowlyfe1 Profile]

Here is the file from a twincharged setup Im working on with a friend its from a 2006 ion redline operating system 12598284