PCM Hammer Release 19

They go by many names, P01, P59, VPW, '0411 etc . Circa 1999 to 2006. All VPW OBD2 PCMs.
User avatar
Posts: 78
Joined: Sun Sep 06, 2020 10:04 pm

Re: PCM Hammer Release 19

Postby yoheer » Wed Dec 22, 2021 2:51 am

I thought that every allpro carrys pic18f .. chip onboard

I'm searching for OS 12579439, 12570845,12578048, 12572573 bin files. MPV preffered. Couldn't find any.
Pleeeease :)

Posts: 213
Joined: Wed Jul 05, 2017 8:30 am
Location: North TX, USA

Re: PCM Hammer Release 19

Postby MudDuck514 » Wed Dec 22, 2021 10:34 am

Gampy wrote:Not sure I'd try that ... It sounds like your Allpro is different, mine for example uses the LPC1517.
Look at the very very bottom of this page: Allpro USB for what mine looks like.

I'm curious and would like to see an image of your Allpro if you will ...



Hi all;

Is it possible he has THIS adapter:
"Also, you might consider ELM329 AllPro adapter. It is year 2018 and most likely you need only CAN protocol."
It lists it on the page linked above.

Mike

Posts: 213
Joined: Wed Jul 05, 2017 8:30 am
Location: North TX, USA

Re: PCM Hammer Release 19

Postby MudDuck514 » Wed Dec 22, 2021 10:35 am

yoheer wrote:I thought that every allpro carrys pic18f .. chip onboard

I'm searching for OS 12579439, 12570845,12578048, 12572573 bin files. MPV preffered. Couldn't find any.
Pleeeease :)



Hi all;

The PIC18f chips are often used in ELM Clones!

Mike

Site Admin
User avatar
Posts: 6808
Joined: Sat Feb 28, 2009 8:34 pm

Re: PCM Hammer Release 19

Postby antus » Wed Dec 22, 2021 4:25 pm

Yeah that looks like the elm329 re-implementation type allpro. No good for pcmhammer, no VPW protocol support.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 78
Joined: Sun Sep 06, 2020 10:04 pm

Re: PCM Hammer Release 19

Postby yoheer » Wed Dec 22, 2021 6:57 pm

I've checked via hyperterminal. It does support both vpw and pwm. It might be an old unit

User avatar
Posts: 1392
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 19

Postby Gampy » Wed Dec 22, 2021 11:03 pm

You call it an ALL PRO, why do you call it an Allpro, did you purchase it from Obddiag.net ??
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!

User avatar
Posts: 78
Joined: Sun Sep 06, 2020 10:04 pm

Re: PCM Hammer Release 19

Postby yoheer » Thu Dec 23, 2021 1:35 am

Gampy wrote:You call it an ALL PRO, why do you call it an Allpro, did you purchase it from Obddiag.net ??

When I connect it via Hyperterminal and input AT@1 AT@2 AT@3 it says:
OBDDIAG.NET v.5.16 by Alex Sidorenko, PIC18F2550

PWM wiring is OK
VPW wiring is OK
ISO9141/14230 wiring is OK
CAN MCP2515 reply is OK

I think it is the earliest revesion of this device.
Also I have the 5.16 firmware file for it. If you can add this device to PCMHammer it would be good. Because this device is usless for now. It's to obsolete and there is no modern software that supports it.

User avatar
Posts: 1392
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 19

Postby Gampy » Thu Dec 23, 2021 3:37 am

It's impossible to determine what command returned what with it all gobbed together.

I doubt there is any interest in adding it unless it's super simple.
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!

Site Admin
User avatar
Posts: 6808
Joined: Sat Feb 28, 2009 8:34 pm

Re: PCM Hammer Release 19

Postby antus » Thu Dec 23, 2021 11:26 am

Yeah it wont support long packets (thats a show stopper) or 4x (which is a nice to have). Agree really old version. I seem to have a firmware binary in my archives tagged as obddiag.net with no source and dated 2009 for the pic cpu, so it was a thing. I think it all started here https://hackaday.com/2007/11/07/inexpen ... interface/
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 1392
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 19

Postby Gampy » Wed Jan 12, 2022 10:18 am

So, I guess I'm going backwards ... My Allpro no longer reports v1.22!

It doesn't report anything ... :x :thumbdown:

I dun did f'd it up!

Sure did want to get that binary off.
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!

PreviousNext

Return to GM LS1 512Kbyte and 1Mbyte

Who is online

Users browsing this forum: No registered users and 4 guests