PCM Hammer Release 19

[yoheer]

I thought that every allpro carrys pic18f .. chip onboard

I'm searching for OS 12579439, 12570845,12578048, 12572573 bin files. MPV preffered. Couldn't find any.
Pleeeease

[MudDuck514]

Not sure I'd try that ... It sounds like your Allpro is different, mine for example uses the LPC1517.
Look at the very very bottom of this page: Allpro USB for what mine looks like.

I'm curious and would like to see an image of your Allpro if you will ...

Hi all;

Is it possible he has THIS adapter:
"Also, you might consider ELM329 AllPro adapter. It is year 2018 and most likely you need only CAN protocol."
It lists it on the page linked above.

Mike

[MudDuck514]

I thought that every allpro carrys pic18f .. chip onboard

I'm searching for OS 12579439, 12570845,12578048, 12572573 bin files. MPV preffered. Couldn't find any.
Pleeeease

Hi all;

The PIC18f chips are often used in ELM Clones!

Mike

[antus]

Yeah that looks like the elm329 re-implementation type allpro. No good for pcmhammer, no VPW protocol support.

[yoheer]

I've checked via hyperterminal. It does support both vpw and pwm. It might be an old unit

[Gampy]

You call it an ALL PRO, why do you call it an Allpro, did you purchase it from Obddiag.net ??

[yoheer]

You call it an ALL PRO, why do you call it an Allpro, did you purchase it from Obddiag.net ??

When I connect it via Hyperterminal and input AT@1 AT@2 AT@3 it says:
OBDDIAG.NET v.5.16 by Alex Sidorenko, PIC18F2550

PWM wiring is OK
VPW wiring is OK
ISO9141/14230 wiring is OK
CAN MCP2515 reply is OK

I think it is the earliest revesion of this device.
Also I have the 5.16 firmware file for it. If you can add this device to PCMHammer it would be good. Because this device is usless for now. It's to obsolete and there is no modern software that supports it.

[Gampy]

It's impossible to determine what command returned what with it all gobbed together.

I doubt there is any interest in adding it unless it's super simple.

[antus]

Yeah it wont support long packets (thats a show stopper) or 4x (which is a nice to have). Agree really old version. I seem to have a firmware binary in my archives tagged as obddiag.net with no source and dated 2009 for the pic cpu, so it was a thing. I think it all started here https://hackaday.com/2007/11/07/inexpen ... interface/

[Gampy]

So, I guess I'm going backwards ... My Allpro no longer reports v1.22!

It doesn't report anything ...

I dun did f'd it up!

Sure did want to get that binary off.