PCM Logger 21 - Testing

They go by many names, P01, P59, VPW, '0411 etc . Circa 1999 to 2006. All VPW OBD2 PCMs.
Posts: 311
Joined: Wed Apr 11, 2018 8:50 am

PCM Logger 21 - Testing

Postby bubba2533 » Fri May 27, 2022 12:33 am

I've been using PCM Logger for testing of my new custom OS and I've found some issues.

I'm going to try and document the issues that I've had so that they can possibly be reproduced and resolved.

Logging Halted Issue:
I've been able to reproduce this error multiple times.
  1. Open PCM Logger
  2. Connect Device to PC (VX Nano in my case)
  3. Select Device
  4. Select Parameters Tab
  5. Error "Logging Halted" in Display Area
  6. Selecting a parameter to log does nothing

Debug Log:
Code: Select all
[10:26:43:880]  PCM Logger
[10:26:43:880]  Thursday, May 26 2022 @10:26:43:88
[10:26:43:880]  Initializing J2534 Device
[10:26:43:880]  Loaded DLL
[10:26:44:495]  Connected to the device.
[10:26:44:526]  Battery Voltage is: 12.753
[10:26:44:682]  Protocol Set
[10:26:44:698]  Device initialization complete.
[10:26:44:698]  ValidDeviceSelectedAsync started.
[10:26:44:698]  TX: 6C 10 F0 3C 0A
[10:26:44:917]  RX: 6C F0 10 7C 0A 04 88 20 33
[10:26:44:948]  ValidDeviceSelectedAsync ended.


Error:
Logging Halted.PNG
Logging Halted.PNG (24.29 KiB) Viewed 225 times
LS1 Boost OS: If you have Questions about the current release post Here. If you have feature suggestions post in the Development Thread

Posts: 311
Joined: Wed Apr 11, 2018 8:50 am

Re: PCM Logger 21 - Testing

Postby bubba2533 » Fri May 27, 2022 12:52 am

PID Boolean Profile Issue:
I've been able to reproduce this error multiple times.
  1. Connect Device to PC, Open PCM Logger, Select Device
  2. Select Profiles Tab and Open Basics Profile
  3. Open Parameters Tab and add Boolean Parameters "Cold Startup" & "Loop Status" (Both are from PID 1105)
  4. Open Profiles Tab and Save As new profile
  5. Close PCM Logger and re-open
  6. Select Parameters Tab and now 2 "Cold Startup" Parameters are listed

Before Closing PCM Logger:
PID Boolean Issue Before Closing.PNG
PID Boolean Issue Before Closing.PNG (36.26 KiB) Viewed 222 times


After Closing and Reopening:
PID Boolean Issue After Close & Reopen.PNG
PID Boolean Issue After Close & Reopen.PNG (30.64 KiB) Viewed 222 times
LS1 Boost OS: If you have Questions about the current release post Here. If you have feature suggestions post in the Development Thread

User avatar
Posts: 670
Joined: Fri Feb 02, 2018 3:13 pm

Re: PCM Logger 21 - Testing

Postby NSFW » Sat May 28, 2022 1:42 pm

Thanks for reporting these. I'll look into it.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!

Return to GM LS1 512Kbyte and 1Mbyte

Who is online

Users browsing this forum: No registered users and 1 guest