Jatco automatic transmission 11P

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 5
Joined: Fri Oct 06, 2017 4:33 am
Location: Broome WA

Jatco automatic transmission 11P

Postby Vrv8hz » Thu Nov 19, 2020 11:45 pm

I have a R31 skyline RB30 auto that I would like to use a 424 to manage. The engine side of things is running with a jackaroo DIS and crank trigger. Next I would like to look at using the 424 to control the auto. Any guidance would be appreciated TIA

Site Admin
User avatar
Posts: 6395
Joined: Sat Feb 28, 2009 8:34 pm

Re: Jatco automatic transmission 11P

Postby antus » Fri Nov 20, 2020 12:08 pm

I cant give you any advise but I dont think its terribly difficult. I know VL400 made a small adapter board and ran a toyota transmission on 11P in his car. Im not sure what it'd take to configure the pcm though, it has an idea of shift pressures etc, and Im not sure if the maps would just work or do something the trans couldnt handle. This post mentions it, there is likely a bit more info elsewhere in the thread.viewtopic.php?f=16&t=92&p=84040#p85525
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 14 guests