Hi,
Have got someone that has fitted a vt supercharged v6 into a Vs and wants to know if the VT ecu will work with the VS or not?,
or do they have to buy a VS ECU and then go from there?
Cheers
VT supercharged V6 ECU into VS supercharged 6
-
mattyc
- Posts: 54
- Joined: Fri May 21, 2010 10:26 am
-
Holden202T
- Posts: 10435
- Joined: Sat Feb 28, 2009 11:05 am
- Location: Tenambit, NSW
Re: VT supercharged V6 ECU into VS supercharged 6
well if the supercharged motor is anything like the natural aspirated motor then the wiring loom is slightly different ....
can either re-pin the loom to suit the pcm or get the right pcm.
can either re-pin the loom to suit the pcm or get the right pcm.
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
yoda69
- Posts: 1226
- Joined: Sun Mar 15, 2009 12:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: VT supercharged V6 ECU into VS supercharged 6
There are also the differences between the BCM/PCM strategy from VS to VT, so will have problems with cooling fans, AC fans strategy, etc. running a VT ECU and bin in a VS.
Would suspect it would be easier to run the VS ecu with a VS S/C bin.
yoda69
Would suspect it would be easier to run the VS ecu with a VS S/C bin.
yoda69