VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

[The1]

I also added seed/key unlock to the menu to try out, if you have debug on it should show all the details.

[The1]

v1.3 out now. & Lots of my hrs gone

Added Reset PIM Option with PIN
Added Relink PIM to ECU
Added ECU Calibration Information & Existing VIN
Added Write VIN

[hsv08]

v1.3 out now. & Lots of my hrs gone

Added Reset PIM Option with PIN
Added Relink PIM to ECU
Added ECU Calibration Information & Existing VIN
Added Write VIN

Perfect!! Now i wish i didnt throw away all my old injectronics ecus with no stored VIN number and no pims. Could have reused them now!!!

[VX L67 Getrag]

AWESOME work, I can't wait to test it out & see how it goes... but sure you've got it mickey mouse by now!

[The1]

Yeh used ecu's are good to go now!

Yeh Gareth tested in a VZ for me with a cardaq cable, ive tested with VXDiag and Tactrix here on the bench several times.

[hsv08]

Yeh used ecu's are good to go now!

Yeh Gareth tested in a VZ for me with a cardaq cable, ive tested with VXDiag and Tactrix here on the bench several times.

MDI tests great. Used 150ms, silencing bus, on bench. I knew code so started it 100 pins out and worked flawless. Good work.

[The1]

Sweet!

Just a note with the PIM reset is that the PIM retains it's pin code, i will have to see what in the eeprom is changed with the reset command. Ill have to look at if PIM Supports read/write through the bus.

[antus]

Great work! I think i'll move this to the tools area and sticky the thread (leaving the topic shadow in place to people can still find it)

[hsv08]

Im very Keen to try the auto relink! No more silly security access prompts and having to go in and out of the MDI to obtain security access with each link!

[The1]

yep, on my test bench with known pin code i can do, ecu reset, pim reset and relink in a few seconds.