FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)
-
Cranbourne auto
- Posts: 1
- Joined: Fri Apr 16, 2021 10:01 am
- cars: Vn ss
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67
I would like to purchase everything to do live tuning even I I pay someone to run me Thur it how to do a vy supercharger. I know hp tuners but want to know this platform and the best way thanks
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67
Have a look at the guides in the FAQ area (the link is up near the top right) as a starting point, and the documentation in the1's enhanced thread (that link is also in the FAQ). Contact details to buy the PCM gear are in the first post. I dont think training is offered, but you can always ask. If your prepared to do some reading of the docs that exist as a starting point and create a thread with details of what you are doing and good questions you can usually find help here.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Thomas2004Rodeo
- Posts: 26
- Joined: Sat Oct 28, 2023 10:53 am
- cars: A rusty fucked tricyle with one wheel
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67
Any of these still kicking around?
-
Gareth
- Posts: 2678
- Joined: Fri Mar 14, 2014 10:37 am
- Location: Bacchus Marsh, Vic
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67
Yes, I sell many every week
According to chemistry, alcohol is a solution...
-
RalphusGalkinsmelter
- Posts: 17
- Joined: Tue Mar 19, 2024 5:52 am
- cars: 1992 Ln106 running a 5L 304
2013 Amarok - Location: Brisbane
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)
Hey gangsters. I've been reading around the forum whilst on nightshift and getting out of work. Theres mention on another thread about how this NVRAM from you Gareth is only supposed to be on whilst tuning? And then once happy with the tune, sending it over to secondary DS1245Y-70IND+ NVRAM/ SRAM to run full time. Im trying to find some clarity/ learning wtf is going on, as i barely understand most of what is discussed on this forum. You're all geniuses as far as I'm concerned.
To quote antus from NVRAM Battery Life (viewtopic.php?t=7897&hilit=eeprom+11p)
"yep, if your not tuning it anymore you should transfer the tune to an eeprom in a socket on a memcal. it is convenient to leave the nvrams in the car but they're really a tuning tool and not designed to be permanent. Theres a few threads about how to do this around, or you should post a request and ask if someone can do it for you. Either way make sure you have a complete copy of the bin your pc as a backup (eg ose flash tool -> get bin for $11p and $12p)"
To quote antus from NVRAM Battery Life (viewtopic.php?t=7897&hilit=eeprom+11p)
"yep, if your not tuning it anymore you should transfer the tune to an eeprom in a socket on a memcal. it is convenient to leave the nvrams in the car but they're really a tuning tool and not designed to be permanent. Theres a few threads about how to do this around, or you should post a request and ask if someone can do it for you. Either way make sure you have a complete copy of the bin your pc as a backup (eg ose flash tool -> get bin for $11p and $12p)"
The grass might be greener on the other side, until you land in a patch of bindis.
-
Gareth
- Posts: 2678
- Joined: Fri Mar 14, 2014 10:37 am
- Location: Bacchus Marsh, Vic
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)
Yes, that information is correct. EEPROM are less likely to get wiped or corrupted accidently.
According to chemistry, alcohol is a solution...
-
jjd2296
- Posts: 13
- Joined: Sat Feb 14, 2026 10:09 pm
- cars: I have 2 custom fiero GTs with 3.4 v6 and v 5 superchargers. in the middle of swapping in 1227165 ecm with the $12P hacked code.
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)
I’m looking for a couple nvram memcal adaptors. 808 (gm 7165). I have messaged Gareth but no response.
-
Gareth
- Posts: 2678
- Joined: Fri Mar 14, 2014 10:37 am
- Location: Bacchus Marsh, Vic
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)
You haven't messaged me at all
According to chemistry, alcohol is a solution...
-
jjd2296
- Posts: 13
- Joined: Sat Feb 14, 2026 10:09 pm
- cars: I have 2 custom fiero GTs with 3.4 v6 and v 5 superchargers. in the middle of swapping in 1227165 ecm with the $12P hacked code.
Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)
message sent. thnx