Anybody been able to remove 2011+ Mustang Ecu PATS systems?

[hsv08]

As above, Have a customer with a 2019 Mustang that wants to set it up to run standalone. Now from what i read, Even disabling the PATS in 2011+ Ecus doesn't actually allow them to run in a standalone configuration.

Has anybody had much luck with these years? Apparently you need to send the Ecus away...

[VX L67 Getrag]

Have you got a file to look at, the only later 2 I have are 2016 & 2018(have some others pre 2011) but the later 1's need a lot later version of HPT.

[hsv08]

Have you got a file to look at, the only later 2 I have are 2016 & 2018(have some others pre 2011) but the later 1's need a lot later version of HPT.

Im hoping to have access to the vehicle this week so will download the ROM with HPT

[VX L67 Getrag]

Try to get it with HPT3.6 if possible.

[hsv08]

Try to get it with HPT3.6 if possible.

I'll give it a crack with v3.6

I know the struggle with trying to open later HPT files with earlier version..

MPVI1 on one laptop and MPVI2 on another

[hsv08]

I'm just hoping 3.6 will support that late of a controller.

[VX L67 Getrag]

Try to get it with HPT3.6 if possible.

I'll give it a crack with v3.6

I know the struggle with trying to open later HPT files with earlier version..

MPVI1 on one laptop and MPVI2 on another

Perfect way to do it!

[VX L67 Getrag]

Yeah I’m pretty sure they supported them on the 3.6 version

[delcowizzid]

We had to send the ecu to the states for a hardware mod to disable pats

[hsv08]

We had to send the ecu to the states for a hardware mod to disable pats

Thats what I hear. Who did you send it too? And what was the charge?