253 V8 carby selection

For non EFI mechanical discussion
'quipt4it
Posts: 675
Joined: Sun Oct 28, 2012 2:57 am

Re: 253 V8 carby selection

Post by 'quipt4it »

.
Last edited by 'quipt4it on Fri Aug 27, 2021 3:13 pm, edited 1 time in total.
User avatar
Madmatt2006
Posts: 373
Joined: Fri Aug 31, 2018 4:48 am
cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT
Location: Katandra West

Re: 253 V8 carby selection

Post by Madmatt2006 »

BP ultimate, would that be ok?
'quipt4it
Posts: 675
Joined: Sun Oct 28, 2012 2:57 am

Re: 253 V8 carby selection

Post by 'quipt4it »

.
Last edited by 'quipt4it on Fri Aug 27, 2021 3:14 pm, edited 1 time in total.
User avatar
Madmatt2006
Posts: 373
Joined: Fri Aug 31, 2018 4:48 am
cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT
Location: Katandra West

Re: 253 V8 carby selection

Post by Madmatt2006 »

[youtube]https://www.youtube.com/watch?v=dceB3SKBw9w[/youtube]

I'll get Premium Dude! :lol:
'quipt4it
Posts: 675
Joined: Sun Oct 28, 2012 2:57 am

Re: 253 V8 carby selection

Post by 'quipt4it »

.
Last edited by 'quipt4it on Fri Aug 27, 2021 3:14 pm, edited 1 time in total.
User avatar
Madmatt2006
Posts: 373
Joined: Fri Aug 31, 2018 4:48 am
cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT
Location: Katandra West

Re: 253 V8 carby selection

Post by Madmatt2006 »

Had an idea :idea: would it make it safer to pull spark plugs out disconnect fuel line then charge the few batteries I have laying around and turn the engine over many times to make sure oil is primed after filling the oil pump.

Just to be super safe :think:
'quipt4it
Posts: 675
Joined: Sun Oct 28, 2012 2:57 am

Re: 253 V8 carby selection

Post by 'quipt4it »

.
Last edited by 'quipt4it on Fri Aug 27, 2021 3:14 pm, edited 1 time in total.
User avatar
Madmatt2006
Posts: 373
Joined: Fri Aug 31, 2018 4:48 am
cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT
Location: Katandra West

Re: 253 V8 carby selection

Post by Madmatt2006 »

'quipt4it wrote:You could do it that way.
I was also going to say not to 'blip' the throttle while running in that new stick, however tempting it may be :lol:
:thumbup: :D I won't
VK_3800
Posts: 578
Joined: Sun Jul 04, 2010 5:15 am
cars: SS Torana
Location: NZ

Re: 253 V8 carby selection

Post by VK_3800 »

A Holden V8 will not pick up oil by cranking - the pump must be correctly primed, and you need to get it started straight away especially if you haven't primed the engine galleries fully.

The best way is to remove the filter and use a hand pump with the hose sealed against the centre bore.
User avatar
Madmatt2006
Posts: 373
Joined: Fri Aug 31, 2018 4:48 am
cars: VZ SVZ Commodore
VH Commodore
JZZ30 Soarer GTT
Location: Katandra West

Re: 253 V8 carby selection

Post by Madmatt2006 »

VK_3800 wrote:A Holden V8 will not pick up oil by cranking - the pump must be correctly primed, and you need to get it started straight away especially if you haven't primed the engine galleries fully.

The best way is to remove the filter and use a hand pump with the hose sealed against the centre bore.
Sounds easier that way, so pump oil in the hole for the filter, snug fit hose. How much oil should be pumped in?