GM You done f*cked UP with programming
Re: GM You done f*cked UP with programming
Wow.. just gave it a crack and grabbed a subscription for shits and gigs.
Not only did it decide to just uninstall my MDI manager, by GDS2 and tech2win. Then persists to enforce using 'its' version.
Yeah no.. Imma stick to original tis2web.
Not only did it decide to just uninstall my MDI manager, by GDS2 and tech2win. Then persists to enforce using 'its' version.
Yeah no.. Imma stick to original tis2web.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
-
- Posts: 598
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: GM You done f*cked UP with programming
Sounds like gm finally pushed everyone thru techline disconnect.. Go ahead and change the shortcut to reflect that, it'll make you feel better at least. They made gm dealers switch to this or nothing months ago.
They just pushed an update thru on the 5th of this month, made the connection problem worse and no idea on anything else.
Tazzi, you have a choice to stick with tis2web?
They just pushed an update thru on the 5th of this month, made the connection problem worse and no idea on anything else.
Tazzi, you have a choice to stick with tis2web?
Re: GM You done f*cked UP with programming
Yeah I have a choice with tis2web.
But dealers do also appear to still have a choice with tis2web though.
But dealers do also appear to still have a choice with tis2web though.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
-
- Posts: 598
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: GM You done f*cked UP with programming
we used to have a choice but they took it away about 2 weeks ago, others lost it a month ago.. The tis2web link is still there in globalconnect but it doesn't go anywhere... I'm guessing your part of the end stage and you'll lose it eventually as well..Tazzi wrote:Yeah I have a choice with tis2web.
But dealers do also appear to still have a choice with tis2web though.
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: GM You done f*cked UP with programming
is it still possible for me to choose the old tis2web somehow as well then or is it gone?
i couldnt add a vin i purchased today...
im about to ring Detroit
i couldnt add a vin i purchased today...
im about to ring Detroit
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: GM You done f*cked UP with programming
Well there's no point trying to call them again this morning.
This is up now.
Do any of you dealership guys know if it's working for you?
This is up now.
Do any of you dealership guys know if it's working for you?
Re: GM You done f*cked UP with programming
I'll be heading to my dealer bud here in Calif tomorrow and will let you all know what's shakin here.
Re: GM You done f*cked UP with programming
Nah, cant add old vin options, thats why I bought their new system to see what the hell it was all about. Guess only time will tell if mine goes away.julespatch wrote:is it still possible for me to choose the old tis2web somehow as well then or is it gone?
i couldnt add a vin i purchased today...
im about to ring Detroit
Kinda stupid if you ask me, they have built it all into an app which can be pulled apart... just saying...
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- Holden202T
- Posts: 10330
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: GM You done f*cked UP with programming
the EPA got to GM too ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread