Help needed! converting 202 to delco

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: Help needed! converting 202 to delco

Post by Holden202T »

make sure you configure the wideband 0v and 5v settings in the tune to match the widebands analog output.
Top
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 9:47 am
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

v6bucket wrote:Are you using a manual or auto trans?
Manual
Shake N Bake!
Top
v6bucket
Posts: 768
Joined: Tue Jul 21, 2009 12:02 am

Re: Help needed! converting 202 to delco

Post by v6bucket »

I know I said that you may need a VSS, but my HJ ute with manual & 202 is working ok.
20210919_121059.jpg
You do not have the required permissions to view the files attached to this post.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
Top
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 9:47 am
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

v6bucket wrote:I know I said that you may need a VSS, but my HJ ute with manual & 202 is working ok.
20210919_121059.jpg
I took mine for a test drive today. It’s burning a bit of oil which is messing with the o2 readings a bit but otherwise ran great. Now time for tuning!
You do not have the required permissions to view the files attached to this post.
Shake N Bake!
Top
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: Help needed! converting 202 to delco

Post by Holden202T »

good to hear your getting it sorted!
Top
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 9:47 am
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

Holden202T wrote:good to hear your getting it sorted!
thank you! Thanks for the help everyone. Ill still be posting if i have some smaller issues.
Shake N Bake!
Top
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 9:47 am
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

im back, just wondering how to set the transmission to 'manual' in the adx
Shake N Bake!
Top
User avatar
vlad01
Posts: 8548
Joined: Mon Oct 08, 2012 8:41 am
cars: VP I S
VP I executive
VP II executive
VP II executive #2
Location: Kyneton, Vic

Re: Help needed! converting 202 to delco

Post by vlad01 »

According to one of my wiring diagrams B10 is grounded to tell the ECU it's manual
Top
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 9:47 am
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

vlad01 wrote:According to one of my wiring diagrams B10 is grounded to tell the ECU it's manual
i will have to check my grounds, but the live readout in tunerpro is registering that it is an auto when im 99% sure that B10 is grounded
Shake N Bake!
Top
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: Help needed! converting 202 to delco

Post by Holden202T »

if its an auto its only grounded in park and neutral, if its grounded all the time its a manual ... it wouldnt be done unless you did it.
Top

Return to “Delco ECU Conversions”