E55 Flasher VZ Rodeo and Saab 93
E55 Flasher VZ Rodeo and Saab 93
VzFlasher V0.05
- Reads ECU calibration and Full flash
- *Writes SPS Gzipped files calibration and full flash
- *Writes full flash and missing secondary OS files
- *Uses an internal database to check for correct main OS to engine cal and superseded files
- Displays file info from a database lookup
- *Won’t write SPS files if not found in database (Incorrect cal to OS will damage ECU)
- *Have included most modules in folders of their OS
- *Full SPS writes require these folders for looking up missing Secondary OS
- There is a stop button available to abort a process but using it mid write can damage ecu
* Not available in demo version
- Reads ECU calibration and Full flash
- *Writes SPS Gzipped files calibration and full flash
- *Writes full flash and missing secondary OS files
- *Uses an internal database to check for correct main OS to engine cal and superseded files
- Displays file info from a database lookup
- *Won’t write SPS files if not found in database (Incorrect cal to OS will damage ECU)
- *Have included most modules in folders of their OS
- *Full SPS writes require these folders for looking up missing Secondary OS
- There is a stop button available to abort a process but using it mid write can damage ecu
* Not available in demo version
Last edited by mattyjf01 on Wed Feb 07, 2024 1:42 pm, edited 11 times in total.
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VZ E55 Flasher
i dont have a use for it, but it looks good
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VZ E55 Flasher
Update - added 1 module and 3 database entries
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
-
- Posts: 596
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: VZ E55 Flasher
I have nothing with an E55 but this looks awesome!!! Thanks for contributing this!!!!!
Re: VZ E55 Flasher
Same here, looks greatironduke wrote:I have nothing with an E55 but this looks awesome!!! Thanks for contributing this!!!!!
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: VZ E55 Flasher
good stuuf bro.
i just tried to read a calibration off a unit here - that was successful. then i wrote one from you files - that worked. but when i try to write the one i just read back it gives me this error.
my file is attached.
10:03:20.7 - Ecu contains
10:03:20.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:12:39.2 - Reading Calibration 0x001C2000, 0x001DFFFF
10:13:39.1 - Calibration Read Successful
10:13:39.1 - Operation completed successfully
10:14:03.7 - Ecu contains
10:14:03.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:14:03.8 - File contains
10:14:03.8 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:14:05.3 - Writing Calibration 0x001C2000, 0x001DFFFF
10:14:35.2 - Calibration Write Successful
10:15:10.4 - Ecu contains
10:15:10.4 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - Ecu contains
10:16:15.7 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - C:\VZ E55 TOOL\VZ FLASHER\MY FILES\92190931.bin
10:16:15.7 - Incorrect engine calibration file or format
i just tried to read a calibration off a unit here - that was successful. then i wrote one from you files - that worked. but when i try to write the one i just read back it gives me this error.
my file is attached.
10:03:20.7 - Ecu contains
10:03:20.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:12:39.2 - Reading Calibration 0x001C2000, 0x001DFFFF
10:13:39.1 - Calibration Read Successful
10:13:39.1 - Operation completed successfully
10:14:03.7 - Ecu contains
10:14:03.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:14:03.8 - File contains
10:14:03.8 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:14:05.3 - Writing Calibration 0x001C2000, 0x001DFFFF
10:14:35.2 - Calibration Write Successful
10:15:10.4 - Ecu contains
10:15:10.4 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - Ecu contains
10:16:15.7 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - C:\VZ E55 TOOL\VZ FLASHER\MY FILES\92190931.bin
10:16:15.7 - Incorrect engine calibration file or format
- Attachments
-
- 92190931.bin
- (1.88 MiB) Downloaded 239 times
Re: VZ E55 Flasher
Thanks matejulespatch wrote:good stuuf bro.
i just tried to read a calibration off a unit here - that was successful. then i wrote one from you files - that worked. but when i try to write the one i just read back it gives me this error.
my file is attached.
10:03:20.7 - Ecu contains
10:03:20.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:12:39.2 - Reading Calibration 0x001C2000, 0x001DFFFF
10:13:39.1 - Calibration Read Successful
10:13:39.1 - Operation completed successfully
10:14:03.7 - Ecu contains
10:14:03.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:14:03.8 - File contains
10:14:03.8 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:14:05.3 - Writing Calibration 0x001C2000, 0x001DFFFF
10:14:35.2 - Calibration Write Successful
10:15:10.4 - Ecu contains
10:15:10.4 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - Ecu contains
10:16:15.7 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - C:\VZ E55 TOOL\VZ FLASHER\MY FILES\92190931.bin
10:16:15.7 - Incorrect engine calibration file or format
My read files aren't sps format.
So when you click the write calibration button and it ask Write sps calibration file?, Select NO
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VZ E55 Flasher
Update
Added Engine Calibration 92190931.bin
Added Engine Calibration 92190931.bin
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VZ E55 Flasher
Update
Fixed TesterPresent error in writing full flash
Fixed TesterPresent error in writing full flash
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VZ E55 Flasher
tested today, works great! thanks