PCM Hammer Release 020 Preview

[joukoy]

Sweet joukoy ...

It is possible to get it to produce the raw data in text form ??

Edit; When connecting it always responds with an 'Empty response' what is that ??

You can save data to CSV, but I can add another format if required.
Can you show example of format? Maybe something like "Console" in settings tab? (Enable from Advanced section)

Or you can enable console, start analyzer and copy data from analyzer window. I can add save-option there, too.
Edit: Copy from console-window.

Empty response usually means it can't read OS version from pcm. Maybe message should be hidden...

[Gampy]

I'll look about a bit more, such a busy app it's hard to follow along and understand what goes with what, when and where ... Maybe that's just my dried up old pea brain!

I don't know about others, personally I would like just a simple running log like,

[10:49:46:813] TX: 6C10F034001000FF8000
[10:49:46:852] RX: 6CF010740044

Raw data ...

Edit; BTW, Obviously it works very well!!

[darkman5001]

Not trying to push my own code too much, but have you tried my updated version? Seems to work switching between normal and 4x speeds as far as pcmhammer is concerned, haven't tried it with sps yet..

viewtopic.php?f=26&t=7744&start=20[/quote]

No, but I will give it a shot.

[darkman5001]

How do I use it to record VPW data? I couldn't figure it out.

Start UniversalPatcher.exe
select Utilities -> Logger
Select "Settings" -tab, setup your device.
Select "Analyzer" tab and click "Start Analyzer"

But if you ask how hardware should be set up... I have no idea.

Ok I will try that. I'm good on my hardware setup. Thanks.

[NSFW]

Release 020 is out: viewtopic.php?f=42&t=7758