Hi guys, I have a vs 5 litre in my vk but am using vs ecu with a vp loom.
Want to do some data logging but not sure how to go about it because loom is not from that ecu.
Ecu number is 16206305.
Can anyone point me in the right direction?
Data logging aldl question
-
hsvt472
- Posts: 8
- Joined: Sun Dec 21, 2014 9:48 pm
- cars: HSV Clubsport R8
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Data logging aldl question
Retroactively install the obd2 style port with b+, both grounds, and ALDL pins wired as per the VS. Go the 'the1s enhanced' tunes section and download the VS enhanced that best lines up, and use the ADX file from that as a definition in tunerpro, keepinging mind that additional features suppored in enhanced which are not available in stock wont read at all or wont read correctly unless you change the memcal to enhanced and wiring / hardware changes where applicable (eg wideband)
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
hsvt472
- Posts: 8
- Joined: Sun Dec 21, 2014 9:48 pm
- cars: HSV Clubsport R8
Re: Data logging aldl question
Thanks mate, exactly what i was after