Gm bcm and cluster can bus messages through eml327 script

[04colyZQ8]

Now I can't get type 4 app to work after installing windows 7 VM x64 on my macbook, everything else works great!

anyone else have type4 app dps working wiht windows 7 64?

[Gampy]

Yes, it is complex and overwhelming, that is because it does a lot and is very powerful ...

kur40 tried to help and you pretty much ignored him.

I highly recommend you loose the ELM and use the Mongoose and AVT.

If you can't because you don't know how, then I suggest you learn how to use your tools first ...
Universal Patcher's J-Console logger should be one of your tools for what you are wanting to do.

You cannot build a house without first building a foundation for it!

Sorry, if this sounds a bit harsh ... it is what needs to be said!

-Enjoy

[ironduke]

I’ll have to try it myself with the changes I made and see if it still works. Universal patcher is good too but I figure if we can get mine to work it’ll be a little easier for you to change and use for your own code so you can try things with a j2534 instead of the elm. I did try writing mileage yesterday with an e92 but it failed every time with the df write command no matter what I tried.

[ironduke]

Now I can't get type 4 app to work after installing windows 7 VM x64 on my macbook, everything else works great!

anyone else have type4 app dps working wiht windows 7 64?

There’s a couple files you need. Can either get them by performing a programming event with sps2 or one of us can send them to you. I can but not til later.

[04colyZQ8]

ok, can't do sps progamming on windows 7 anymore:(

[04colyZQ8]

So I just tried my trax again also won't program millage simular errors got to be the way I am sending the long multy messages


see below
atz


ELM327 v1.5

>AT SH 00 02 41
OK

>AT CRA 00 00 06 41
OK

>atsp6
OK

>2701
67 01 50 77

>27 02 D5 5F
67 02

>AE 3F 01 01 00 00 00
7F AE E3 00 16

>atcaf0
OK

>07 0E 3B DF 00 9C 40 00
03 7F 0E 11 00 16 92 4C

>07 22 00 9C 40 00 00 9C
03 7F 22 31 00 16 92 4C

>04 21 9C 40 00
03 7F 21 11 00 16 92 4C

>07 AE 3F 01 00 00 00 00
05 7F AE E3 00 16 92 4C

>
05 7F AE E3 00 16 92 4C

>
03 7F AE 78 00 16 92 4C
05 7F AE E3 00 16 92 4C

>atcaf1
OK

>2701
67 01 50 77

>1adf
00E
0: 5A DF 00 9C 88 C8

>2701
67 01 50 77

>27 02 D5 5F
67 02

>
STOPPED

>¶¶¶¶
?

>
?

>¶¶¶¶
?

>2701
67 01 50 77

>27 02 D5 5F
67 02

>AE 3F 01 01 00 00 00
7F AE E3 00 16

>atcaf0
OK

>07 0E 3B DF 00 9C 40 00
03 7F 0E 11 00 16 88 C8

>07 21 00 9C 40 00 00 9C
03 7F 21 11 00 16 88 C8

>04 22 9C 40 00
03 7F 22 12 00 16 88 C8

>
STOPPED

>¶¶¶¶¶¶¶atcaf1
?

>atcaf1
OK

>1adf
00E
0: 5A DF 00 9C 88 C8

>atsh007ea
?

>at?

>AT SH 00 07 E0
OK

>AT CRA 00 00 07 E8
OK

>1adf
?

>1adf
5A DF 00 A4 14 00

>

[04colyZQ8]

Now I can't get type 4 app to work after installing windows 7 VM x64 on my macbook, everything else works great!

anyone else have type4 app dps working wiht windows 7 64?

There’s a couple files you need. Can either get them by performing a programming event with sps2 or one of us can send them to you. I can but not til later.

ok thanks I added sps/nativelib/tvs4.dll and tvcsec.dll

still not workign but sps wasn't even there had to createit? so think I need more! but typically that works

[04colyZQ8]

I just don’t seem to grasp how to send Long messages in parts or the bcm won’t except it like that and only excepts if it’s sent in one block?

[ironduke]

1 - Log data for Engine ECU(7E0,7E8,7DF,101):
2 - Log data for Transmission ECU(7E2,7EA,7DF,101):
3 - Log data for Engine AND Transmission ECU(7E0,7E8,7E2,7EA,7DF,101):
4 - Log data for with ID's you define, ex.7E0/7E2,101
5 - Log ALL data
6 - Toggle Debug mode(shows data captured on screen, may cause buffer issues with lots of data)
7 - Exit
8 - Logging to file, Press 8 to show log on screen only
9 - Logging High speed(6&14), press 9 to change
1
1 - MDI
2 - MDI 2
3 - MongoosePro GM II
4 -

Input Device Number:3
Press the p key to pause log, all monitoring will pause
Press any key to stop logging
starting log in 2 seconds
starting log in 1 second
Starting log
bfinished, your file was saved to D:\log.txt
Press any key to exit program, please note your log file location


was output but nothing in log

Were you trying anything with the ecm using the elm or something else? If not you wouldn't see any 07 e0 or 07 e8 data.. If that's the case instead if selecting 1 for ecm try selecting 5 to log everything.. It does work ok with my mdi.. I don't have a mongoose to try it with though, sorry..

[04colyZQ8]

1 - Log data for Engine ECU(7E0,7E8,7DF,101):
2 - Log data for Transmission ECU(7E2,7EA,7DF,101):
3 - Log data for Engine AND Transmission ECU(7E0,7E8,7E2,7EA,7DF,101):
4 - Log data for with ID's you define, ex.7E0/7E2,101
5 - Log ALL data
6 - Toggle Debug mode(shows data captured on screen, may cause buffer issues with lots of data)
7 - Exit
8 - Logging to file, Press 8 to show log on screen only
9 - Logging High speed(6&14), press 9 to change
1
1 - MDI
2 - MDI 2
3 - MongoosePro GM II
4 -

Input Device Number:3
Press the p key to pause log, all monitoring will pause
Press any key to stop logging
starting log in 2 seconds
starting log in 1 second
Starting log
bfinished, your file was saved to D:\log.txt
Press any key to exit program, please note your log file location


was output but nothing in log

Were you trying anything with the ecm using the elm or something else? If not you wouldn't see any 07 e0 or 07 e8 data.. If that's the case instead if selecting 1 for ecm try selecting 5 to log everything.. It does work ok with my mdi.. I don't have a mongoose to try it with though, sorry..

np I was using 1 with pcm attached and mongoose