NEGATIVE SPARK VS ENHANCED
-
encrypted
- Posts: 8
- Joined: Wed Jun 17, 2020 11:30 am
- cars: Turbo ls vy calais turbo eco vy Calais vz 6L sedan
Vf ss wagon
NEGATIVE SPARK VS ENHANCED
Trying to set the decel tables in a vs v6 enhanced bin when set to a negative valve and saved when you reopen the table it’s set to 0 instead of a say -15 on decel is there a max spark retard table somewhere you have to change to let it go into negative value in vx/vy I can set it to say -20 on the decel spark stables and it will stay at -20 and have stupid crackle on decel
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: NEGATIVE SPARK VS ENHANCED
Check the equasion in both the XDFs and see whats dfferent. It could be that the range is changed and now starts at zero so you can run more advance, or it could be just done with a different equation or setting (signed vs unsigned) that you can change to get it working. Im not saying it does work, just where to look.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396