vx l67 enhanceed mod issue

upyas · Post by **upyas** » Fri Jul 28, 2023 1:07 am

thanks Antus, can you please put the link to those files in this thread? i cannot find them

thanks

upyas · Post by **upyas** » Fri Jul 28, 2023 1:27 am

i checked the file name and that is the exact file that i have for it, it does not work at all on this vx with ddrh ecu

is there a older version that might work? or something else that i can try please?

VX L67 Getrag · Post by **VX L67 Getrag** » Fri Jul 28, 2023 1:31 am

try this file, I cant find easy link to it either...
viewtopic.php?f=13&t=5096&p=75327&hilit ... ced#p75327

upyas · Post by **upyas** » Fri Jul 28, 2023 1:35 am

i am using this one

upyas · Post by **upyas** » Fri Jul 28, 2023 1:43 am

VX L67 Getrag wrote:try this file, I cant find easy link to it either...
viewtopic.php?f=13&t=5096&p=75327&hilit ... ced#p75327

can you private message me the file please? i cannot see it there

Post by **Gareth** » Fri Jul 28, 2023 1:44 am

viewtopic.php?f=27&t=2518

Post by **antus** » Fri Jul 28, 2023 1:48 am

Your "this one" post is the correct file, that should be working. If it is not then maybe there is a problem with how you are writing it. Are you using nvram or writing to a memcal? Wondering if there is a hardware problem or a process problem, not the file itself.

VX L67 Getrag · Post by **VX L67 Getrag** » Fri Jul 28, 2023 1:58 am

You’re using a moates ostrich so when programming it in tunerpro make sure you have bank8 selected

upyas · Post by **upyas** » Fri Jul 28, 2023 1:58 am

antus wrote:Your "this one" post is the correct file, that should be working. If it is not then maybe there is a problem with how you are writing it. Are you using nvram or writing to a memcal? Wondering if there is a hardware problem or a process problem, not the file itself.

the other files run the car but have dash problems, i am writing to a emulator, changes in fueling etc working as it should with other files it is just the vx file does not work in this car at all.

i will write it to a memcal and try it now

upyas · Post by **upyas** » Fri Jul 28, 2023 1:59 am

VX L67 Getrag wrote:You’re using a moates ostrich so when programming it in tunerpro make sure you have bank8 selected

correct otherwise it says there is not enough room and you should select bank 8

vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue

Re: vx l67 enhanceed mod issue