Thought it was time for some talk about scannerpro great free software from mark at tunerpro.just been setting up a nice dash and BLM table etc heres a couple of piccys.its allso being incorporated into the next version of tunerpro R/T
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
hopefully up for release soon.now i allways bummed out there was no blm table like winaldl but seems it was there all along i just needed to make it
![wall :wall:](./images/smilies/wall.gif)
so shes all go now even has cell tracing as you can see from the yellow cell it moves over whatever cell you are in at the time.worst thing with it is if you set it for 11 cells wide to make it goto 100 it messes with the labeling of the columns as some are not at 10kpa spacing so its at 80 max for that reason which for blms is not an issue anyway as closed loop doesnt go any higher.i made a second table for O2 volts as well would be nice to have the higher map areas on that one but ill have to disscuss that with mark and i dont want to cause any more delays in the TP V5 release
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
it allso has a graph output of the same data in a nice tunerpro style graph format and tables can be made off any data from the aldl rpm vs map or what ever you want then whatever item in the cells might see if i can make it show acceleration graphs
Screen0003.JPG
Screen0004.JPG