Help help from one of the USA guys to forward a part to Aus.
Re: Help help from one of the USA guys to forward a part to
Just FYI Vlad,
Parts shipped to me today and I should have next Tuesday
Parts shipped to me today and I should have next Tuesday
- vlad01
- Posts: 7841
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Help help from one of the USA guys to forward a part to
Thanks for the update
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Help help from one of the USA guys to forward a part to
Either is fine! Just let me know!vlad01 wrote:To you in Aus, he said he was going to send you some stuff with his DHL account or something along those lines instead of the MyUS? Or if not, DHL it to me. Bundling it all together should bring the shipping cost down from the US I assume. Or maybe your MyUS can be used for this step? I don't know
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- vlad01
- Posts: 7841
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Help help from one of the USA guys to forward a part to
Will do!
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Help help from one of the USA guys to forward a part to
Hiya,
It's on its way. I made the executive decision to ship directly to you. This way we don't have to bother Tazzi to re-ship to you, I mean I know he doesn't have anything better to do USPS lady said 6-8 working days to you(I sent priority mail and not standard post, it was only ~$6 more). I pm'd you a copy of the receipt with tracking number. I haven't used the MyUS yet but will have to when I get Tazzi's stuff boxed up soon.
Enjoy
It's on its way. I made the executive decision to ship directly to you. This way we don't have to bother Tazzi to re-ship to you, I mean I know he doesn't have anything better to do USPS lady said 6-8 working days to you(I sent priority mail and not standard post, it was only ~$6 more). I pm'd you a copy of the receipt with tracking number. I haven't used the MyUS yet but will have to when I get Tazzi's stuff boxed up soon.
Enjoy
- vlad01
- Posts: 7841
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Help help from one of the USA guys to forward a part to
Awesome! really appreciate all the help.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7841
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Help help from one of the USA guys to forward a part to
Bit of a drama on where the package went as USPS had 0 updates on the tracking since In-Tech sent it.
But it randomly arrived today and very much appreciate the help, you're a legend!
All the newer factory shifters which I added to the order since it was cheap are short shifters compared to what we had here in Aus.
Fitment might be an issue but either way, it might be ok, if not I can still strip it for parts to rebuild a stock ones. I find that I prefer a standard over short as it's nicer to drive and actually quicker and easier to shift due to the leverage advantage the stock one has and also drastically less miss-shifts due to wider gate spacing.
Sometimes it's actually counter intuitive.
The counter shaft plates are exactly the same as I have purchased in the past. Top quality and consistency!
But it randomly arrived today and very much appreciate the help, you're a legend!
All the newer factory shifters which I added to the order since it was cheap are short shifters compared to what we had here in Aus.
Fitment might be an issue but either way, it might be ok, if not I can still strip it for parts to rebuild a stock ones. I find that I prefer a standard over short as it's nicer to drive and actually quicker and easier to shift due to the leverage advantage the stock one has and also drastically less miss-shifts due to wider gate spacing.
Sometimes it's actually counter intuitive.
The counter shaft plates are exactly the same as I have purchased in the past. Top quality and consistency!
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Help help from one of the USA guys to forward a part to
YAY! sheesh, finally, glad it arrived well.
- vlad01
- Posts: 7841
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Help help from one of the USA guys to forward a part to
The tracking now says "delivered"
Would have been nice to have info along the way, so not to have created so much confusion. But glad that's done!
Would have been nice to have info along the way, so not to have created so much confusion. But glad that's done!
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Help help from one of the USA guys to forward a part to
https://www.kijiji.ca/v-transmission-dr ... 1674479773 eh just happened to come across this, that is pretty cheap no?