BZPT 51 xdf injector scaling

[efidyn]

Hi, can anyone tell me a site address for injector scaling (constant) for a VS manual V6 or has a good xdf file that works with this code.

Regards, Ez.

[delcowizzid]

https://pcmhacking.net/forums/download/file.php?id=27 $51 XDF cant remember if it has the injector size in it orr not

[delcowizzid]

https://pcmhacking.net/forums/viewtopi ... &t=5#p5588 and holden 202's thread with another

[efidyn]

Thanks for the reply but have seen the post and used both xdfs with no luck as most of the stuff I want to use does not have the correct values in them. Do you know the site address for this one thing so I can finish tuning a vehicle with larger injectors?

Ez.

[delcowizzid]

Injector Flow Rate - mS/Gram Of Fuel in top window is the only thing in $51 theres no table like a ve table as far as im aware to fine tune people have looked pretty much just have to use the MAF tables

[Jayme]

yeah thats the getrag bin... most of the calibration items are offset from the earlier bins holden202's xdf is for, some items are up to 347 bytes out.

[efidyn]

Not looking for a VE table or fuel table as such, just an address for the scaling.

[efidyn]

Or could anyone tell me the value I should be looking for so I can find it myself.

[Holden202T]

is this any help ?

https://pcmhacking.net/forums/view ... tor#p10547

[Jayme]

I beleive you need to be looking at the $51 variant F in that thread

For N/A $51 (Variant F) bins it is 2bytes at $4425/6 and the value should be $1CE8, conversions is X/20.48 = 7400/20.48 = 361.3 msec/gram.