Opel EDC16C39 Turbo Diesel Tuning

[VX L67 Getrag]

This thing has got me stonkered, I have found & edited another 20 or so table to try & get this thing from smoke at full load fuel tables with 11-13AFR & still no change...
Has anyone had any experience with these(new changes attached that didn't work)

[VX L67 Getrag]

Seems that change I made to hopefully stop skid control didn't work either in that change of latest file.

[biela]

Hello

You need to increase Lambda values to get less smoke.

FMTC_trq2qBas should extend torque axis, because of request in Torque limiter.

You don´t need to modify SOI maps at this moment.

[VX L67 Getrag]

Excellent, o.k. that seems back to front to me, but I'll give it a go... I was told because the drivers wish was adjusted below 2000rpm is why it was smoking so much so any tips & advice is appreciated!

[VX L67 Getrag]

Hello

You need to increase Lambda values to get less smoke.

FMTC_trq2qBas should extend torque axis, because of request in Torque limiter.

You don´t need to modify SOI maps at this moment.

Just for reference with extending the torque axis how does this happen as with diesel & general rule of thumb fuel is torque so wouldn't that also be adding fuel?

[biela]

Yes, you can extrapolate fuel IQ for new torque values.

Also Injector Time map (0x1DCBFA) is decalibrated.

Better put ori values or extrapolate IOT in a similar way as FMTC_trq2qBas.