P01 or p59 crankshaft input modification
-
1fast72nova
- Posts: 7
- Joined: Thu May 30, 2024 6:37 pm
- cars: 72 nova
P01 or p59 crankshaft input modification
Has anyone been able to locate where the crankshaft signal is first processed in the PCM? I'd like to intercept the signal before it's processed
-
antus
- Site Admin
- Posts: 10096
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: P01 or p59 crankshaft input modification
Which OS? I think its connected to an interrupt, you should be able to get the entry point from one of the external interrupt vectors near the start of the bin.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
NSFW
- Posts: 802
- Joined: Fri Feb 02, 2018 5:13 am
Re: P01 or p59 crankshaft input modification
Are you asking for a location on the circuit board, or in the code?
It's pin 12 on the blue connector if that helps:
https://dirtysouthraceengineering.com/b ... ecu-pinout
It's pin 12 on the blue connector if that helps:
https://dirtysouthraceengineering.com/b ... ecu-pinout
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!