DELCOS NEW RIDE

[delcowizzid]

Cheers immortality been a while .
Yes vlad it should make easy power there's one over here at 750rwhp in a track car.it made sense to start here with 4 valve per cylinder than struggling with Buick airflow restrictions lol

[vlad01]

Yep, the alloytec's head flows very well stock, and the engine as a whole really can rev very high without issue, hence why they make easy power without needing anywhere near as much boost as other common engine combos. Even NA with mods and big cams, they have easily surpassed 450hp at the crank figure, some reports of 500hp.

[Gareth]

and the engine as a whole really can rev very high without issue,

They are well known to kick the rods out with higher than stock RPM, ask me how I know

All the speedway guys replace the rods (and bolts) with something more suitable for RPM. There's even a titanium option!!

[vlad01]

These engines can easily do over 9k when built, right?

I personally not seen bottom end failures on them, but I don't know of many examples used in racing, only normal road cars which are normally just boosted stock engines.

[delcowizzid]

She's alive the injectors were all stuck shut took half an hour to free them up the bang is the 6th one coming to life properly lol https://www.instagram.com/reel/C-FIGMJp ... dmOXdiZw==

[delcowizzid]

Next will be some experimenting with a saab 2.8 turbo bin file

TurboX_1037395088_40RPCT00E.bin

(2 MiB) Downloaded 521 times

hw 0261209382 sw 1037395078 ORI.bin

(2 MiB) Downloaded 531 times

9-3_TurboX_XWD-1037395088.bin

(2 MiB) Downloaded 587 times

[antus]

Nice one! Love the pop then it starts running smooth

[immortality]

Damn that's a tight fit on the intake pipe.

[delcowizzid]

It's a tight fit on a lot of things haha

[Holden202T]

Next will be some experimenting with a saab 2.8 turbo bin file
TurboX_1037395088_40RPCT00E.bin
hw 0261209382 sw 1037395078 ORI.bin
9-3_TurboX_XWD-1037395088.bin

interesting!