PCM Hammer Release 021

[emilebos2]

Select the OBDX Pro device as a serial device, do not select it as a J2534 device.

Update: All sorted!!!

The serial device connection did the trick, stock tune read and saved. Will work through my fan settings now and edit & write the tune back in the next few days. Thanks again Tazzi, you’re a wizard!

[WheelGreaser]

Should this (PCMHammer 021.2) currently work with an E38?

Test device is from
VIN 2CNDL63F276121380
2007 Chevrolet Equinox 2WD (6 Cylinders F 3.4L FI OHV 207 CID)

ODBXplorer worked to read faults, so I think my hardware is mostly verified.

I'll go into more detail if this is user error. I'm definitely a newb to Gen3/4 controllers. I found a reference to one of my old files in the FAQ, so I hope I've contributed a tiny bit. Would love to be able to contribute again.
-greg

debuglog
[03:39:47:250] PCM Hammer 021.2
[03:39:47:277] Friday, January 19 2024 @03:39:47:27
[03:39:47:292] Initializing OBDX Pro on COM10
[03:39:47:524] Unable to retrieve credits.html from network: HTTP NotFound.
[03:39:47:540] Unable to retrieve start.txt from network: HTTP NotFound.
[03:39:47:540] Unable to retrieve help.html from network: HTTP NotFound.
[03:39:47:573] Loaded credits.html from cache.
[03:39:47:575] Loaded start.txt from cache.
[03:39:47:577] Loaded help.html from cache.
[03:39:47:586] Thanks for using PCM Hammer.
[03:39:48:223] Device Found: OBDX Pro GT
[03:39:48:236] Switched to DVI protocol
[03:39:48:269] XPro: 32 0C 03 4F 42 44 58 20 50 72 6F 20 47 54 85
[03:39:48:273] XPro: 32 05 01 01 00 01 00 C5
[03:39:48:275] Firmware version: v1.0.1.0
[03:39:48:279] XPro: 32 05 00 01 00 00 00 C7
[03:39:48:281] Hardware version: v1.0.0.0
[03:39:48:286] XPro: 32 11 04 6B A6 0F 8C D5 BD 1A 9D DF 58 87 A6 46 29 74 32 4A
[03:39:48:289] Unique Serial: 6BA60F8CD5BD1A9DDF5887A6
[03:39:48:299] XPro: 41 02 01 01 BA
[03:39:48:302] OBD Protocol Set to VPW
[03:39:48:313] XPro: 43 03 00 F0 01 C8
[03:39:48:315] Filter set and enabled
[03:39:48:328] XPro: 41 02 02 01 B9
[03:39:48:331] Network enabled
[03:39:48:335] Device Successfully Initialized and Ready
[03:39:54:120] XPro: 20 01 00 DE
[03:39:54:125] TX: 6C 10 F0 3C 01
[03:39:54:633] Timeout.. no data present A
[03:39:54:636] VIN query failed: Timeout
[03:39:54:653] DVI setting VPW 4X
[03:39:54:662] XPro: 43 02 06 01 B3
[03:39:54:667] XPro: 20 01 00 DE
[03:39:54:669] TX: 6C 10 F0 20
[03:39:54:670] DVI setting VPW 1X
[03:39:54:674] XPro: 43 02 06 00 B4
[03:39:54:681] XPro: 20 01 00 DE
[03:39:54:682] TX: 6C 10 F0 20

[In-Tech]

Hiya,
As far as I know, PcmHammer does not work on e38's yet.

[antus]

Correct, no CAN computers are supported. Only P01/P59, P10, P12 VPW computers. And there is a different test version with some P04/P08 VPW, but that is still a work in progress and currently no eta.

[WheelGreaser]

No worries. I'll see what I can learn about the VPW controllers. I've got a pair of those (one in service and one on bench). If I can contribute either bin or aid in testing, just ask. I'll be tinkering with those. Specs/info below.
Thanks for the great work!
-greg

In service controller:
Model Year: 2003
Make: CHEVROLET
Model: Silverado
Series: 1500
Engine Displacement (L): 5.3
Drive Type: 4x2
Cylinders: 8
Engine Model: LM7 Iron

OS ID: 12579405
Hardware Type: P01_P59
Calibration ID: 12579403
Hardware ID: 12570558
Serial Number: 1CC12ZLV2249
Broad Cast Code: YCTJ

On Bench controller:
CHEVROLET
Silverado
2000
General Series 1500 (1/2 ton)
General Trim
Drivetrain Drive Type 4x2
Engine Displacement (L) 5.3
Engine Engine Model LM7

OS ID: 9381344
Hardware Type: P01_P59
Calibration ID: 9379551
Hardware ID: 16220610
Serial Number: 1DG14K440109
Broad Cast Code: CYCB

[antus]

Thanks. Testing is not needed at the moment, we need developer help on the C# programming side of the actual app.

[tonn0297]

Hello, is there any possibility to get support for a Kvaser Leaf Light v2? When trying to connect i get the error 03, and i suspect its because missing DLL or alike.. or is there an option for me to add support myself?
https://kvaser.com/product/kvaser-leaf-light-hs-v2/
And heres the SDK https://kvaser.com/single-download/?download_id=47112

[antus]

No, that is a CAN bus interface. PCM Hammer does not support CAN protocol or PCMs. It may one day, but there are no current plans.

[tonn0297]

Okay the reading I did just made it look like it culd read the Bin via can

[vwnut8392]

Been using this great program for a while now and wondered if i could make a small request? would it be possible to make the write calibration button write the calibration block and both parameter blocks?