Modifying a 082 to write
-
Vrv8hz
- Posts: 93
- Joined: Thu Oct 05, 2017 6:33 pm
Modifying a 082 to write
Can anyone point me in the right direction on where the jumper wire goes on this 082. I thought they were the same as a 808 but side by side does not look like it. I did try to find the guide but had no luck locating it.
-
Vrv8hz
- Posts: 93
- Joined: Thu Oct 05, 2017 6:33 pm
Re: Modifying a 082 to write
You do not have the required permissions to view the files attached to this post.
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Modifying a 082 to write
here, or the flat edge connector you can see that the pin is connected to.
You do not have the required permissions to view the files attached to this post.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Vrv8hz
- Posts: 93
- Joined: Thu Oct 05, 2017 6:33 pm
Re: Modifying a 082 to write
Thanks Antus. Do you have a link to the ecm modification guide?
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Modifying a 082 to write
sent via pm
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396