Thanks guys
Wade
Is the the tune you were referring to?
viewtopic.php?p=127754#p127754
New to LS1 tuning
-
darky82
- Posts: 129
- Joined: Wed Jul 13, 2011 10:35 am
- cars: Holden vs statesman
- Location: Sydney
-
Wade
- Posts: 1246
- Joined: Sun Jul 10, 2016 8:29 pm
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: New to LS1 tuning
Yeah that’s it mate
-
darky82
- Posts: 129
- Joined: Wed Jul 13, 2011 10:35 am
- cars: Holden vs statesman
- Location: Sydney
Re: New to LS1 tuning
Cheers
And that will be fine on the 411 pcm?
And that will be fine on the 411 pcm?
-
Wade
- Posts: 1246
- Joined: Sun Jul 10, 2016 8:29 pm
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: New to LS1 tuning
Works on vt to vy ls1 with cable throttle. Vz dbw is different just to clarify.
-
darky82
- Posts: 129
- Joined: Wed Jul 13, 2011 10:35 am
- cars: Holden vs statesman
- Location: Sydney
Re: New to LS1 tuning
Just want to double check these are the correct pins to use for a bench setup?
I don't have a plug but I have insulated some plug terminals that's sit nice and tight on there
I don't have a plug but I have insulated some plug terminals that's sit nice and tight on there
You do not have the required permissions to view the files attached to this post.
-
antus
- Site Admin
- Posts: 10096
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: New to LS1 tuning
Its around the site in a few places, here is one: viewtopic.php?p=122843#p122843
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
darky82
- Posts: 129
- Joined: Wed Jul 13, 2011 10:35 am
- cars: Holden vs statesman
- Location: Sydney
Re: New to LS1 tuning
Is that the plug side or the PCM side but?
That's what I wasn't sure of..
That's what I wasn't sure of..
-
antus
- Site Admin
- Posts: 10096
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: New to LS1 tuning
Thats the right one. I sit them the other way, heat sinks up, and in my bench its the top one. In yours its hard to see, but I think its heat sinks down so bottom connector.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
darky82
- Posts: 129
- Joined: Wed Jul 13, 2011 10:35 am
- cars: Holden vs statesman
- Location: Sydney
Re: New to LS1 tuning
OK cheers mate
I've counter the pins twice so I should be good to power up
I've counter the pins twice so I should be good to power up
-
darky82
- Posts: 129
- Joined: Wed Jul 13, 2011 10:35 am
- cars: Holden vs statesman
- Location: Sydney
Re: New to LS1 tuning
It work a treat, got the factory bin from my PCM
Do I only need to get the bin once or is it better to get a second copy of it?
Do I only need to get the bin once or is it better to get a second copy of it?