VS-VY Enhanced Factory Bins

[Chr0m3]

Sharing my version of the enhanced VY xdf

I've added all of my stuff to the latest XDF from Wade, so it should have all of the same stuff.

Added ability to switch spark maps by using power / performance mode on an auto VY.
Added CC/MIN injector rate scaling for different fuels (Makes changing injectors a lot easier).

Changed version and added some notes to description so people don't get confused on version etc..
Just load this XDF with the enhanced 060A VY

If spark table swap patch is enabled, when performance mode is enabled it will load ignition timing from 'Performance Mode - Main Spark RPM Vs MGC' tables.

VY_V6_$060A_Enhanced_v1.2.xdf

[Gareth]

Thanks for sharing

[Wade]

Awesome thanks mate

[hsv08]

Legend. Love that the ecotec stuff is being worked on again

[Chr0m3]

Awesome thanks mate

No problem, worth noting I looked at your VXCOMMS flag in the 060A XDF as I was curious, the bit you're setting seems to be unused, not sure if that's mistake or not.

[Wade]

[Wade]

[Wade]

If you find anything else that’s incorrect plz let me know cheers

[Chr0m3]

If you find anything else that’s incorrect plz let me know cheers

I apologize, after a deeper dive that address does seem to be correct, sorry about that.

5797 bit 2 (0x04) does indeed look like it enables VX comms.

What confused me was the bit not being accessed by any code, but I didn't consider the fact it stores it in ram and all code references the bit from that address.

[Chr0m3]

Added 'Open Loop - Idle AFR Vs Coolant Temp' to VS XDF as someone requested it
Sharing it here.